This took a little head scratching until I figured out why my osd
daemons were not restarting under Infernalis on Gentoo.
I had just upgraded from Hammer to Infernalis and had reset ownership
from root:root to ceph:ceph on the files of each OSD in
/var/lib/ceph/osd/ceph-n. However I forgot t
Yesterday, no error.
[root@mon01 ceph]# service ceph-mon@mon01.service status
Redirecting to /bin/systemctl status ceph-mon@mon01.service.service
ceph-mon@mon01.service.service - Ceph cluster monitor daemon
Loaded: loaded (/usr/lib/systemd/system/ceph-mon@.service; enabled)
Active:
Hi,
I keep getting this error:
2016-04-01 10:55:59.666015 7fe7301ee700 0 -- :/3560986127 >>
42.0.30.39:6789/0 pipe(0x7fe724000c00 sd=4 :0 s=1 pgs=0 cs=0 l=1
c=0x7fe724004ef0).fault
2016-04-01 10:56:08.667082 7fe73aa67700 0 -- 42.0.30.38:0/3560986127 >>
42.0.30.39:6789/0 pipe(0x7fe724000c
No - if you use ceph-disk prepare it creates a small filesystem with some
control files, the bluestore partition is not visible.
> -Original Message-
> From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of
> Oliver Dzombic
> Sent: Friday, 1 April 2016 12:08 AM
> To: c
Hi Mart, Wido...
A disclaimer: Not really an expert, just a regular site admin sharing my
experience.
At the beginning of the thread you give the idea that only osd.68 has
problems dealing with the problematic PG 3.117. If that is indeed the
case, you could simply mark that osd.68 down and r
Not sure about commands however if you look at the OSD mount point there is a
“bluefs” file.
From: German Anders [mailto:gand...@despegar.com]
Sent: Thursday, 31 March 2016 11:48 PM
To: Adrian Saul
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] OSD crash after conversion to bluestore
Hey cephers,
Just a reminder that the monthly developer standup will be happening
next Wed, 06 Apr @ 12:30p EST. Please add your blueprint to the
appropriate page on the planning section of the wiki. Thanks!
http://tracker.ceph.com/projects/ceph/wiki/Planning
--
Best Regards,
Patrick McGarry
Hi,
Is there anyone done thin provisioning on OpenStack instances (virtual
machine)? Based on the current configurations, it works well with my cloud
using ceph 0.94.5 with SSD journal (from 18mins to around 7 mins for
creating an 40GB instance and not good SSD iops). But what I wanted is the
stor
Hi Diego,
lets start with the basics and please give us the output of
ceph -s
ceph osd df
ceph osd perf
at best before and after you provike the iowait.
Thank you !
--
Mit freundlichen Gruessen / Best regards
Oliver Dzombic
IP-Interactive
mailto:i...@ip-interactive.de
Anschrift:
IP Intera
Hello, everyone.
I have a pretty basic ceph setup running on top of Azure Cloud, (4 mons and
10 osd's) for rbd images.
Everything seems to be working as expected until i put some load on it,
sometimes it doesn't complete the process (mysql restore for ex.) and
sometimes it does without any issues.
On Wed, Mar 30, 2016 at 5:24 PM Christian Balzer wrote:
> On Wed, 30 Mar 2016 15:50:07 + Calvin Morrow wrote:
>
> > On Wed, Mar 30, 2016 at 1:27 AM Christian Balzer wrote:
> >
> > >
> > > Hello,
> > >
> > > On Tue, 29 Mar 2016 18:10:33 + Calvin Morrow wrote:
> > >
> > > > Ceph cluster wi
the data encode/decode operation is done on OSD side.
2016-03-31 23:28 GMT+08:00 Yu Xiang :
> Thanks for the reply!
> So where did the decoding process happen? Is it in cache or on the client
> side? (Only considering Read.) If it happened when copying from storage tier
> to cache, then it has to
Thanks for the reply!
So where did the decoding process happen? Is it in cache or on the client side?
(Only considering Read.) If it happened when copying from storage tier to
cache, then it has to be an whole object (file), but if decoding can be
happened on client side when the client has all
Hi,
if i understand it correct, bluestore wont use / is not a filesystem to
be mounted.
So if an osd is up and in, while we dont see its mounted into the
filesystem and accessable, we could assume that it must be powered by
bluestore... !??!
--
Mit freundlichen Gruessen / Best regards
Oliver D
having jewel install, is possible to run a command in order to see that the
OSD is actually using bluestore?
Thanks in advance,
Best,
*German*
2016-03-31 1:24 GMT-03:00 Adrian Saul :
>
> I upgraded my lab cluster to 10.1.0 specifically to test out bluestore and
> see what latency difference i
Hi,
We have had lot of troubles developing a ceph over xen. Finaly after
haunderd of test, we talked with libvirt-users seems that the problem was
found on libxl library which did not have support for rbd, but seems this
is solved from 1.3.2 libvirt version and xen-utils >4.5
http://libvirt.or
16 matches
Mail list logo
