-
From: Jacob [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 18, 2002 5:23 PM
To: CF-Talk
Subject: Re: WOT: INACCESSIBLE_BOOT_DEVICE error on Win2k
Can you boot into safe mode?
At 11:28 AM 3/10/2002 -0500, you wrote:
Hello all,
This is not even remotely a CF question
Can you boot into safe mode?
At 11:28 AM 3/10/2002 -0500, you wrote:
Hello all,
This is not even remotely a CF question :) but the contributors to
this list have a broad range of experience, so I'm hoping somebody has run
into this before and has a solution.
One of our
, March 10, 2002 8:29 AM
To: CF-Talk
Subject: WOT: INACCESSIBLE_BOOT_DEVICE error on Win2k
Hello all,
This is not even remotely a CF question :) but the
contributors to
this list have a broad range of experience, so I'm hoping
somebody has run
into this before and has a solution
1:10 PM
To: CF-Talk
Subject: RE: INACCESSIBLE_BOOT_DEVICE error on Win2k
Hi David,
You might want to take a look at this page:
http://www.windowsreinstall.com/install/other/motherboard/problems.htm
They discuss this exact issue, and a variety of possible solutions.
Dirk
-Original
Hello all,
This is not even remotely a CF question :) but the contributors to
this list have a broad range of experience, so I'm hoping somebody has run
into this before and has a solution.
One of our older Win2k machines went down -- the m-board is fried
(bad power supply)
PROTECTED]
To: CF-Talk [EMAIL PROTECTED]
Sent: Sunday, March 10, 2002 11:28 AM
Subject: WOT: INACCESSIBLE_BOOT_DEVICE error on Win2k
Hello all,
This is not even remotely a CF question :) but the contributors
to
this list have a broad range of experience, so I'm hoping somebody has run
: INACCESSIBLE_BOOT_DEVICE error on Win2k
Are you using the same Drive Controller (I.e. IDE or SCSI). We have found
that if you have the same motherboard to use temporarily you can install
drivers for whatever else you are using beforehand.
Let us know what you figure out.
Neil
- Original Message -
From
If it's IDE then you might also try to pop the drive into an
existing box with a current, working Win2000 installation.
If the drive is really OK you should be able to access the drive and
copy/backup the data on it. But if the power supply managed to take
out your MB, then I'd probably be
16:54
To: CF-Talk
Subject: RE: INACCESSIBLE_BOOT_DEVICE error on Win2k
Both systems (fried and new) are IDE...the old m-board is legacy (old)
enough that I haven't been able to find a matching model.
David
-Original Message-
From: Neil H. [mailto:[EMAIL PROTECTED]]
Sent: Sunday
9 matches
Mail list logo