Cracking at the lock hole while handling it, that happened to me also. Fourtunatley the crack is not big enough to be seen and is still covered by the bezel nut. I have not seen a repro yet, so if you find a good used one, be very carefull when handling and installing it. If you bend it, it will
Josh
Yep it was the driver side on mine. What a PITA it was. i hope when i put the ones in my 69 they go easier
Tom
Hey Tom, out of curiousity, which side was the difficlut side for you? I
found the driver side was the tough one for me with my repro inners. I did
eventually get it to bolt in using all the holes but it took some persuasion
with a pointed pry bar! The passenger side almost fell into place.
J
Replies to this message are sent to The Chevelle Mailing List
Thanks Rich.e-mail is [EMAIL PROTECTED] .I could use any
diagrams and info you have .
Mel
67 Malibu SS
- Original Message -
From: "Richard Milkiewicz"
If we get into another monthlong dissertation on
this subject again,I'm outta here. j/k
Clint HooperLT5 RegistryWichita Falls,Tx(940) 855-6636
anytime'90 ZR-1 Red/Red #952TX TAGS: USA ZR1http://www.LT5Registry.com/
Thanks Tom ,,, much appreciated.
Mel
67 Malibu SS
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 27, 2002 7:49
AM
Subject: Re: [Chevelle-List] HEI .not
again!
Mel, All you
need is the dist, cap, rotor, coil, w
Replies to this message are sent to The Chevelle Mailing List
I been a partner in a swap space (just our own extra stuff - we're
hobbyists, not pro's) at Iola for several years. It is billed as the biggest
car show / swap meet in the m
Replies to this message are sent to The Chevelle Mailing List
[EMAIL PROTECTED] wrote:
>
> just an idea- but would a couple pieces of heat shrink over the cut in the
> fiber-optic tube work???
It might, maybe I should grab a bunch o
Replies to this message are sent to The Chevelle Mailing List
Tigergutt wrote:
>
> Welcome to the list !
Thanks
>
> Any pictures of the rear window defroster ??
Here's a crappy one:
http://www.ucalgary.ca/~csimpson/70_large/Chevel
Being
that I live in Lorain, the S&H charges do not exist for me. I am
starting the collection of catalogs, magazines, etc already for the
Chevelle. This project car will be interesting for me, since I am new at
ALL of it. Doing body work is fun (NOTE: Sarcasm), but it feels good to
lear
Tim,
The repro steel inner fenders are most likely going to give you a hell of a time. I installed 2 new repros on my 70. One side fit nice, the other was a total wrestling match for me. i ended up having to redrill the holes to make it fit. unfortunately, all the repros are made by the same o
Wayne,
Go easy on those pullers in the back. I used to pull parts there part time for the counter and we did make a few mistakes but the guys that take them out to you at the counter are supposed to check the parts against the order first. They're usually pretty good though. Summit branded parts a
Replies to this message are sent to The Chevelle Mailing List
I removed my plastic inner fenders to get them out of the way so I can paint my
frame. As many know, the plastic ones are garbage. They are all cracked. I
want to replace
Replies to this message are sent to The Chevelle Mailing List
Ok my turn.
My experience with the Summit branding is that it's mostly junk. I pretty much
refuse to buy anything that says "summit" on it, unless I get a positive review
Replies to this message are sent to The Chevelle Mailing List
Kevin,
I've used Summits parts for yeqars and they have always been good
for me. Just make sure you check the part numbers before you leave the
store. The folks in
Replies to this message are sent to The Chevelle Mailing List
Hi guys,
Have anyone seen the Mooneyes grille emblem lately ?
I know they made it some years ago, but it's not in their catalog anymore.
Kind Regards
André
-Original
Replies to this message are sent to The Chevelle Mailing List
on 1/27/02 11:19 AM, John Nasta at [EMAIL PROTECTED] wrote:
>
> Replies to this message are sent to The Chevelle Mailing List
> ---
Replies to this message are sent to The Chevelle Mailing List
Welcome to the list !
Any pictures of the rear window defroster ??
Kind Regards
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On
Replies to this message are sent to The Chevelle Mailing List
I think Muscle Factory have them.
Sorry no more info because I cant find the ad.
Kind Regards
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PR
And if
you're budget conscious. You can use a stock HEI - (remove the internals) and
wire a MSD6A or 6AL Ignition box directly to it using only the magnet pickup and
mechanical advance.
Nick
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Replies to this message are sent to The Chevelle Mailing List
We have tried the rockers in one engine, they were junk.
My friend called summit after the rockers broke and they credited the full
amount without a discussion.
Not to say
Replies to this message are sent to The Chevelle Mailing List
I just checked and it's only the 1964-65 bezels that are $19.95. The 66
Malibu glovebox fascia is $49.95. That is the only one I show for 66. That's
better than $55. OPG als
Replies to this message are sent to The Chevelle Mailing List
on 1/27/02 9:29 AM, John Nasta at [EMAIL PROTECTED] wrote:
>
> Replies to this message are sent to The Chevelle Mailing List
>
There's also an MSD distributor that only costs around $190
I'm going to install one, and the 6AL ign box into my Chevelle today.
take care,
[EMAIL PROTECTED] wrote:
Mel,
All you need is the dist,
cap, rotor, coil, wires, new spark plugs while your at it. MSD sells
a really nice unit already
Replies to this message are sent to The Chevelle Mailing List
Hate to say it, but that is WAY expensive for a repro bezel. I sell them for
$19.95, and they are Authorized GM Restoration Parts.
John Nasta
Old Car Network
http://oldcarn
Replies to this message are sent to The Chevelle Mailing List
seems the plates are reproduced after all ifound a catalog from car shop
inorange ca they list one for malibu one for ss and seperate listing for
chrome bezel ithougt thedi
Replies to this message are sent to The Chevelle Mailing List
I'm not sure if it's addiction or insomnia. Maybe a little of both.
Brian
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL
Mel,
All you need is the dist, cap, rotor, coil, wires, new spark plugs while your at it. MSD sells a really nice unit already complete for $330. Is a billet HEI dist complete with cap/rotor/coil. It has a vacuum advance unit on it as well. it does not utilize the stock type GM module, however
Replies to this message are sent to The Chevelle Mailing List
I also would like to assist my fellow list members on this subject. I agree
with Rich, and I. M. Shrejk below. These guys know what they are talking
about. There are some b
Replies to this message are sent to The Chevelle Mailing List
Not sure what name you go by, but I would also appreciate a photo of the
spoiler.
Thanks,
Kent
'68 Malibu ZZ502/502 :)
-
Replies to this message are sent to The Chevelle Mailing List
You can also get uninstaller software made by Mcafee. It will eliminate the
traces of old programs and clean up your system. Some of the free software
will leave junk on y
Replies to this message are sent to The Chevelle Mailing List
Mel, Send me your e-mail and I will send you all the info you need along
with diagrams.
Rich
- Original Message -
From: "Mel Anderson" <[EMAIL PROTECTED]>
To: <[EMAI
Replies to this message are sent to The Chevelle Mailing List
You can order the Car Shop catalog on line at.
www.truckandcarshop.com.
The catalog is free and it's one of the best I've gotten. Lot's of "stuff"
in it.
Rich
- Orig
Replies to this message are sent to The Chevelle Mailing List
Good question Rocky. I too broke mine and can't find it anywhere. I did buy
the chrome bezel. Those fascia's sure were flimsy. Mine started to crack
from the lock hole up ju
Replies to this message are sent to The Chevelle Mailing List
You are absolutely right about spy ware. And the program you are talking
about is called Ad-Ware. I have it and run it all the time. Pop - Stopper is
not spy ware. I am very
When you do see Dick would you please tell him howdy from Larry LaDuke in Oregon!
Larry
Replies to this message are sent to The Chevelle Mailing List
Hi folks.first off this is not a how do I install HEI thread rather
a what do I need and what do you recommend thread.
I saved all the installation stuff from previo
Replies to this message are sent to The Chevelle Mailing List
hey brian, are you addicted to this list too?? i see your burnin the midnight
oil too-
you guys are making me late for work in the morning, i start at 6:00 am!
---
38 matches
Mail list logo
