hey guys I paid more than that and they are not 70 chevelle seats might be
68 or 69 with side lever for getting in back seat anyone no where I can have
these seats done around chicago area 630-456-2269
----- Original Message -----
Sent: Wednesday, January 11, 2006 2:21
PM
Subject: Re: [Chevelle-list] Bucket
Seats
Unfortunately, mine was a bench seat car and I already paid
about $125 for
the pair I have. Sounds like I didn't get such a good
deal for the amount
of rust that was hiding under the covers. The
frames are fine, so I
probably will just bite the bullet and get the
complete spring kits.
Thanks,
Matt
At 02:35 PM 1/10/2006,
Trooper wrote:
>I only had one broken spring per seat and there was no
rust. If yours are
>that bad you will probably need the complete spring
kit. I would look for
>replacements first. The seats are the same for
69-72 chevelles and BOP. I
>picked a set up at a swap meet for $125 for
the pair. The seats looked
>terrible but the skeletons were in
excellent shape.
>
>Trooper
>----- Original Message -----
From: "Matthew Post" <[EMAIL PROTECTED]>
>To: "The
Chevelle Mailing List" <Chevelle-list@chevelles.net>;
"The
>Chevelle Mailing List" <Chevelle-list@chevelles.net>
>Sent:
Monday, January 09, 2006 5:18 PM
>Subject: Re: [Chevelle-list] Bucket
Seats
>
>
>>Thanks Trooper. I think my springs are
beyond fixable. (Where they're
>>not broken, they are very
rusty.) $50 each is a great deal
>>though. Maybe I'll
call around locally before I spend many hours trying
>>to fix them
myself.
>>
>>Thanks,
>>Matt
>>
>>At
03:01 PM 1/9/2006, Trooper wrote:
>>>The springs aren't that hard
to replace if you have the right tools but
>>>for the money I
would recommend a pro. I had mine done for $50 each. I
>>>stripped the seats, blasted the frames and POR15'ed them. Then
I took
>>>them to him and I supplied the covers and the foam. He
fixed the
>>>springs, supplied the burlap and added some foam.
The repo foam just
>>>didn't fill out the seats like I wanted
them.
>>>
>>>Trooper
>>>----- Original
Message ----- From: "Matthew Post" <[EMAIL PROTECTED]>
>>>To:
"The Chevelle Mailing List" <Chevelle-list@chevelles.net>
>>>Sent:
Monday, January 09, 2006 12:27 PM
>>>Subject: [Chevelle-list]
Bucket Seats
>>>
>>>
>>>>So, I took the
old seat covers off my buckets seats and it looks like
>>>>the
springs are broken in several places. I saw that reproduction
>>>>spring assemblies are available, but they recommend
"Professional
>>>>Installation". Has anyone tried this at
home? They seemed to be held
>>>>in by metal tabs on the
seat frames in several places, but is there
>>>>more to
it? I was going to recover these seats myself, but now I'm
>>>>debating if I should have a pro tackle this. What do
you guys
recommend?
>>>>
>>>>Thanks,
>>>>Matt
>>>>
>>>
>>
>>
>
>
|
