Replies to this message are sent to The Chevelle Mailing List
The trim is stainless and pretty difficult to polish out. The best way is remove the
piece and use a wheel and polishing compound. I don't think thats practical for the
Replies to this message are sent to The Chevelle Mailing List
With one exception in 72. IF you had a chevelle with the engine code of W in the
VIN (8th place) it HAD to be an SS, because the 454 (code W) was ONLY available in the
Replies to this message are sent to The Chevelle Mailing List
Andre
Just the bellhousing. From Engine mounting surface to trans mount surface.
rick
-- "Tigergutt" <[EMAIL PROTECTED]> writes:
From: "Tigergutt" <[EMAIL PROTEC
Replies to this message are sent to The Chevelle Mailing List
OK - My bad, I apologize. Both Larry & Mel say my interpretation is wrong, so I must
be. But in my defense, its early, I haven't had my second coffee, the sun was in my
Replies to this message are sent to The Chevelle Mailing List
I have a Cam/lifters that you can have. They are a new takeoff from my 300HP/350
crate motor. I believe that the specs are the same or similar to the specs of the
newe
Replies to this message are sent to The Chevelle Mailing List
From: [EMAIL PROTECTED]
i did not know there was more than one larry?? how do i tell??
This is my brother larry and this is my other brother larry.
how do you get the orig
Replies to this message are sent to The Chevelle Mailing List
And just whats wrong with an Elky
-- "Samantha Roberts" <[EMAIL PROTECTED]> writes:
From: "Samantha Roberts" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject
Replies to this message are sent to The Chevelle Mailing List
Long Island boy from waaay back - Islip Terrace & East Islip High School Class of '65.
But, what does this have to do with anything?
rick schaefer
-- "John Nast
Replies to this message are sent to The Chevelle Mailing List
denny
Can't help with your dilemma, but I'd like to hear from someone with a ramjet.
But, I did see in the current CHP that Vintage Air has a set of their own serpent
Replies to this message are sent to The Chevelle Mailing List
david
I have seats from a 97 firebird in my 72 and they are comfortable and supportive.
I used one of the stock holes to locate the seat and then drilled the 3 others
Replies to this message are sent to The Chevelle Mailing List
Folks
I got the following email from a coworker. As I recall, the truck is an early
90's chevy with 305 and a 5 speed manual tranny. Can anyone offer up a suggesti
Replies to this message are sent to The Chevelle Mailing List
Jeff I am very wary of even the "good" repro vinyl. I ordered a PUI interior several
years ago in Tan. Within 3 years it was green/mustard where exposed to UV light.
I
Replies to this message are sent to The Chevelle Mailing List
Also, does weatherstripping have to be ordered from one of those expensive catalogs??
I've seen all kinds of weatherstripping at local
upholstery shops, thinking some of it
Replies to this message are sent to The Chevelle Mailing List
DISREGARD - I found my answer.
rick
Replies to this message are sent to The Chevelle Mailing List
Perhaps one o
Replies to this message are sent to The Chevelle Mailing List
Perhaps one of you ASE certified mechs can help me out. I want to replace the O2
sensor I have (1 wire) in my elky with a heated sensor (3 wire). I found one at the
Replies to this message are sent to The Chevelle Mailing List
-- Bill Willis <[EMAIL PROTECTED]> writes:
"Hello All, Just thought I would introduce myself and ask for some advice. My name is
Bill, and I live in Louisville, Ken
Replies to this message are sent to The Chevelle Mailing List
No thanks. I prefer the 71 look. I had the chance when I replaced the old cracked
grill...stuck with the 71. Sounds like keith prefers the 71 also.
rick
-- "Joh
Replies to this message are sent to The Chevelle Mailing List
jerry are you in middletown? My brother teaches at the community college. I was
there to visit just after T-giving. Beautiful countryside. With all the vehicle
proble
Replies to this message are sent to The Chevelle Mailing List
Someone at Chevelle Tech arranged for a group purchase for tubular A-Body rear control
arms from BMR Fabrication. Sounds like a very good deal. The basic info is here:
h
Replies to this message are sent to The Chevelle Mailing List
There are 2 people who may be able to help or have info on this. First is Tom Wilson.
Tom does the Trivia at www.chevelles.comHe can be reached at
[EMAIL PROTECTED]
Replies to this message are sent to The Chevelle Mailing List
Did anyone else think that the announcers were idiots?? I noticed several significant
mistakes, including reference to a 343 in a 58 chevy convert. I guess that they wer
Replies to this message are sent to The Chevelle Mailing List
wendell
I missed something along the way (not unusual). But if you are asking if the
flywheel from the 350 will fit the 327, the answer is yes. As you said, the 400 is
Replies to this message are sent to The Chevelle Mailing List
Kelley, Tom
Thanx for the help/info. Still couldn't find the owner this PM. Try again
2-morrow.
rick
-
To Unsub
Replies to this message are sent to The Chevelle Mailing List
There are probably more clone SS's available than the General made so first thing is
beware. Don't pay a premium for an SS unless you are absolutely sure it is what you
w
Replies to this message are sent to The Chevelle Mailing List
Great - That was fast - I appreciate the URL.
rick
-
To Unsubscribe please visit www.chevelles.net/list.html
To start
25 matches
Mail list logo