Re: dlsw + ISDN backup

[³ÂÏþì¿]

you can configure your router like this;   username C3640-B password cisco dlsw local-peer peer-id 2.2.2.2 promiscuous dlsw remote-peer 1 tcp 1.1.1.1 dynamic no-llc 10 dlsw netbios-keepalive-filter interface s0  backup interface bri0  backup delay 10 30 interface bri0/0  encapsulation ppp  dialer idle-timeout 60  dialer map llc2 name C3640-B broadcast 1111111  dialer-group 1  .... dialer-list 1 protocol llc2 permit   ----------------------------------------------------- Click here for Free Video!! http://www.gohip.com/free_video/ ----- Original Message ----- From: Andrew Larkins To: emirates ; [EMAIL PROTECTED] Sent: Friday, September 08, 2000 2:59 PM Subject: RE: dlsw + ISDN backup just make sure that the DLSw referneces the loopback addresses and that you are using somncaething like eigrp. Put a default router to the other side BRI with a higher admin distance - such as 200 for example. It will work.. I have it working here   Regards   Andrew -----Original Message----- From: emirates [mailto:[EMAIL PROTECTED]] Sent: 07 September 2000 13:43 To: [EMAIL PROTECTED] Subject: dlsw + ISDN backup Hi Guys,   Small issue regarding DLSW, I want to enable it on two router using Cisco 3640 on serial and use ISDN as a backup. Is there any special configuration required to use isdn backup for dlsw? I would really appreciate if anyone send me sample configuration if its doable?   Best Regards AA