Check for full and half duplex mismatch errors on router and other peer
device, both should be full and 100 or 100 and half.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70385t=70384
--
FAQ, list archives, and subscription
There is gotta be someone near Stockton!!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=54779t=54599
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Need a study partner in or around Stockton,CA to study for the CCIE RS
Written the the lab. If you around Stockton let me know so we can hook up
and knock this test out.
Cisco_King
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=54599t=54599
The NETWORK command in the Router BGP configuration mode is to inject local
internal routes learned via an (IGP) Interior Gateway Protocal Routing
protocal i.e. OSPF,EIGRP... into its BGP routing table. Because IBGP
connections do not need to be directly connected and needs an IGP to get to
its
What is the SH IP BGP output on router 192.168.4.1 ? Give me the Show ip
route and IP BGP route.
Andrew
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14984t=14939
--
FAQ, list archives, and subscription info:
Usually bad hop counts happen when a packet from a remote network whose
source is not comming from the local gateway router. Which means there is a
layer 2 connection between the two segments, in which you need to enable STP
to automatically weed this out and put the port in a disabled state.
6 matches
Mail list logo