read the books and regurgitate them on a multiple choice exam.
The written is a qualification exam, nothing more.
Chris Harshman
Sr. Systems Engineer
Northrop Grumman IT
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48924t=48868
you can only have one address per interface in an OSPF area. The secondary
can only be in the same area as the primary for OSPF to generate an LSA for
that network. If you want to get it to work and don't have another physical
interface, use a loopback and remove the secondary.Waqar Ahmed
Configure both links as trunks then form an ether-channel. Both links will
pass traffic but a failure of one will not affect the other.
Cisco Example:
set trunk 1/1 dot1q on
set trunk 1/2 dot1q on
set port channel 1/1-2 on
Message Posted at:
The OSPF demand circuit command only needs to be placed on the router that
is dialing, unless the ISDN is active, r5 is not receiving hellos, or an LSA
refresh every 30 minutes so the dead timer on the LSAs would expire. This
is overcome with the OSPF demand circuit command. From the output of
Brian,
The easiest solution from understanding your problem is to order an
additional Pri from your service provider and have them configure the trunks
using NFAS (Non-facilities associated signaling) This will allow you to
increase the B channel count by 24 and retain the same dial number for
5 matches
Mail list logo