On Fri, Oct 11, 2002 at 05:51:00PM +0000, Priscilla Oppenheimer wrote: [skip]
> The real answer about load was provided by the original poster. Load is for > output only on a serial link. (I don't think that's true for an Ethernet > interace?? Anyone know??) There are RX and TX loads on ether. But this probably depends on IOS version/ interface hardware/whatever... - the box where I checked ether also shows TX and RX loads on serial: Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500 bytes, BW 1024 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation FRAME-RELAY IETF, loopback not set Keepalive set (10 sec) LMI enq sent 178382, LMI stat recvd 178368, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 4/0, interface broadcasts 4 Last input 00:00:06, output 00:00:02, output hang never Last clearing of "show interface" counters 2w6d Input queue: 0/75/5/0 (size/max/drops/flushes); Total output drops: 238 Queueing strategy: weighted fair Output queue: 0/1000/64/238 (size/max total/threshold/drops) Conversations 0/27/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 14000 bits/sec, 0 packets/sec 5 minute output rate 2000 bits/sec, 1 packets/sec 37258862 packets input, 3870057433 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 2 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 1 abort 42121646 packets output, 1875355617 bytes, 0 underruns 0 output errors, 0 collisions, 4 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up edge#sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IO3-M), Version 12.1(6.5), MAINTENANCE INTERIM SOFTWARE Best regards, Dmitry Afanasiev Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55515&t=55347 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]