Good reading on this:
http://www.cisco.com/warp/public/105/21.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16831t=16797
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Yep. On the sun it show some flapping but no errors on the switch side.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15904t=15885
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
This link has a table about the middle of the page that may be useful.
Here is a quote from the article:
As seen from the table above, depending on various design considerations,
one can choose either UDLD or loop guard. The most noticeable difference
between the two features in regards to the
I am no security expert but I would think you could use private address
space on your internal network and use NAT on the router. Not the best
security design, but if you are limited to the specified resources, this may
work!
Message Posted at:
Has anyone found, heard of, or come up with and easy way to calculate
wildcard masks for acls when blocking a range of addresses? Any good
reading material on configuring acls?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15612t=15612
Nope. The sup is the brain of the box with the OS needed for any kind of
function.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15455t=15435
--
FAQ, list archives, and subscription info:
Sure you can. Use one DTE cable and one DCE cable. On the serial interface
of the router that has the DCE cable, use the interface configuration
command clockrate and set a value like 64000.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14785t=14776
7 matches
Mail list logo