Thanks a lot, I have called Cisco and ordered the Bootrom upgrade, but it
will take at least 2 weeks for arriving.
""guest"" wrote in message
news:200211021521.PAA20132@;groupstudy.com...
> I bought 2 mc3810, but I found I need to upgrade the boot rom first to
> suppor
The MC3810's bootldr image is corrupt,
where can I find it? I have checked the SOFTWARE CENTER,there is nothing
about it.
mc3810-wboot-mz.bin.120-6r.T4 or later is required
System Bootstrap, Version 11.3(1)MA1, MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1998 by cisco Systems, Inc.
Compiled Sat 24
I bought 2 mc3810, but I found I need to upgrade the boot rom first to
support 64mb Dram, how can order this from Cisco, I am an end user.Is there
some reseller can order this?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56733&t=56733
---
Hi,
I bought a mc3810, but when it boots up, it displays:
UART re-init OK (disable AUX port)
boot of "cisco2-MC3810" using boot helper "eprom:mc3810-wboot-mz" failed
error returned: File read failed -- Timed out
loadprog: error - on file open
boot: cannot load "cisco2-MC3810"
I think the b
I found a doc about howto use xmodem to recover the image of cat5000&4000,it
says you can use the xmodem -s 38400 to download via console.And I also
found a topic says recommand not to set the speed upper than 19200,the
xmodem command has some option:
-c to use crc16
-s set speed
I am using the t
Does Cat6K also using an NVRAM for keeping the configuring or simulating the
flash link 2900xl.
and if the config is in NVRAM what the nomally bootvar is?
I can only enter the rommon mode, the system cannot boot correctly.
I have try to use "boot bootflash:cat6000xxx.bin" and confreg 0x2142
,neith
Hi,all
Last Friday,I go out to solve a cat6k's boot problem,Its a Cat6K with
6006 chassis,supervisor 1a msfc2 and one ws-x6408 line card,the
boot problem is:after it decompress the image and displays four lines of
diag message ,the system is halted at "boot bootflash:cat6000-xxx.bin",at
that t
as the same
effect
>
> ""Guest"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > yestoday,i setup a lab environment:using 8510,2924xl,3548xl and a pc as
> > sniffer.
&
yestoday,i setup a lab environment:using 8510,2924xl,3548xl and a pc as
sniffer.
2924xl(0/24)hub--(0/0/1)8510(0/0/0)3548xl
|
|
pc(sniffer)
the first , i am using isl encapsulation in 2924 and 3548,vtp
dom
" you can see this could cause some serious
problems if different VLANs are configured as the native VLAN at each end of
the trunk."
i still can not imaging what type of problem will occur,can you show me some
examples?
now i have enough switch to prove it ,this problem has confused me for days.
t
I believe it means that the router will not listen to the vtp messages. It
will also not pass them along- it is strictly layer 2.
pass them along,you mean just transfer it ,right?but i don't know where it
go,see my
last message,i dont
know which vlan can carry vtp,or like cdp-a purely layer 2 pro
sorry, test only
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18568&t=18545
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTE
i am reading the cit 4.1 ppt,on page 19,it says
a router will be transparent for VTP(forward messages).
what is that mean?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18545&t=18545
--
FAQ, list archives, and subscription in
Hi all,in a trunk,both sides setting as :
trunk mode:desirable
encapsulation:isl
i only try one side native vlan as 1 and the other is 2,except some
error messages,everything is still working
Console> (enable) 2001 Aug 25 20:29:03 %CDP-4-NVLANMISMATCH:Native vlan
mismatch d
etected on port 2/48
14 matches
Mail list logo