Hi all

I am having a problem getting the Cisco DialOut working.
When I type AT the modem(s) respond with no problem
When I try to place a test call they just respond with busy.
I am using a 2620 setup for dialin and dialout. IOS Ver 11.3.

Can anyone help me out here, ?

Also I the digital modems should be capable of connecting at speeds up to 
56k. However I noticed that they are set to 33600
Do you know how to increase this speed also ?

Thanks in advance for your help.
George.

#show modem configuration 1/1
  S-Reg   Value   Meaning
-------|-------|---------------------------------------------
    S-- = 568     Country Code is Ireland
    S00 = 1       Auto Answer after 1 seconds
    S01 = 0       Reserved
    S02 = 43      escape character is 0x2B or '+'
    S03 = 13      carriage return character is 0xD
    S04 = 10      line feed character is 0xA
    S05 = 8       backspace character is 0x8
    S06 = 2       pause 2 seconds before blind dialing
    S07 = 40      wait up to 40 seconds for carrier after dialing
    S08 = 2       comma adds 2 second dial delay
    S09 = 317     BitMap register value = 0x13D
    S10 = 14      1.4 second delay for hangup after carrier loss
    S11 = 0       In Answer Mode
    S12 = 8       8 Data Bits
    S13 = 0       No Parity
    S14 = 1       1 Stop Bits
    S15 = 1       V.42 ODP generation enabled
    S16 = 50      5.0 second Error Correction autodetect timeout
    S17 = 100     10.0 second Error Correction negotiation timeout
    S18 = 13      Error Correction fallback char is 0xD
    S19 = 12      Error Correction retransmission limit is 12
    S20 = 256     Error Correction frame length is 256 octets
    S21 = 3       V42bis or MNP Data Compression
    S22 = 1       ARA Error Correction is enabled for answer, not originate
    S23 = 1       V.42 Error Correction enabled
    S24 = 1       MNP Error Correction enabled
    S25 = 0       Link Protocol Fallback to Async framing
    S26 = 0       Using TDM slice 0
    S27 = 0       Calling Tone disabled
    S28 = 0       Guard Tone disabled
    S29 = 0       V.34+ with terbo modem standard
    S30 = 33600   Maximum connect rate of 33600 bps
    S31 = 300     Minimum connect rate of 300 bps
--More--









________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to