for the ACL in, the traffic is checked before entering the router. for the
ACL out the traffic may enter the router from one interface but bofore
forwarding it to another interface it must be checked first
Thanks and best regards
_ _ _ _ _ _ _ _ _ _
- Original Message -
From: "none ya"
All,
I have a problem in 7206 midplane can anyone help me in disassembling the
chassis to reach the midplane?
please advise
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40186&t=40186
--
FAQ, list archives, and subscription inf
We are ISP with AS advertised in Ripe, and we have number of class C . A
client want to use some class C of mine and he wants to BGP peer with me and
advertise this classes to me. The client has its own registered AS in Ripe.
How can we do that?
Thanks and best regards
Message Posted at:
htt
I configured AS 5400 with 16 PRI. Users connect and get IP from the pool but
when i ping them from the AS i get no reply
please advise
Thanks and best regards
_ _ _ _ _ _ _ _ _ _
Ismail M Saeed
Senior Network Engineer
GEGA NET
Tel. +202-4149771 ext.125
[EMAIL PROTECTED]
Message Posted at
Hi All,
Any one can send me sample configuration for PPP & ATM over MPLS
Thanks and best regards
_ _ _ _ _ _ _ _ _ _
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65024&t=65024
--
FAQ, list archives, and subscription info: http
It will receive the analog calls but u will need modem module to teminate
them
- Original Message -
From: "Anil Kumar V"
To:
Sent: Wednesday, March 19, 2003 2:00 PM
Subject: PRI Module [7:65734]
> Hi,
>
> I have a doubt.
>
> If I have a 2600 Router with ISDN PRI network module. The
> m
All,
Any idea about ATM links with end-to-end support for OAM cells configuration
to detect remote equipment failure
Thanks and best regards
_ _ _ _ _ _ _ _ _ _
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70715&t=70715
--
FAQ
Dear All,
The CIT 640-606 still a Beta exam till now?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47367&t=47367
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
All,
I need to enable IP QoS over ATM VC
I used the following configuration but it did'nt work
Any ideas?
class-map match-all tv
match access-group 100
policy-map tv
class tv
bandwidth 128
interface ATM2/0.177 point-to-point
description "TV-INTERNET"
bandwidth 256
ip address 10.10.0.1
All,
I need to enable IP QoS over ATM VC
I used the following configuration but it did'nt work
Any ideas?
class-map match-all tv
match access-group 100
policy-map tv
class tv
bandwidth 128
interface ATM2/0.177 point-to-point
description "TV-INTERNET"
bandwidth 256
ip address 10.10.0.1
Dear All,
I am a little bit confused about the calculation criteria used in rate-limit
command and the traffic metering function (Bc & Be)
I need help
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57604&t=57604
--
FAQ, list arch
Dear All,
I am running AS 5400 with 16 PRI (analog modems only) and I am facing modem
disconnection after 15 to 30 minutes and the reason is lost carrier
Any info about the reason of this lost carrier (cabling or modem or chassis
or
configuration etc..)
Thanks and best regards
_ _ _ _ _ _ _ _
I hope the mentioned below answer your Q
Does the Gigabit Switch Router (GSR) support bridging?
A. No. The GSR runs Cisco IOS. Software Releases 12.0S and 11.2GS, which
are designed to provide robust IP routing and enhanced IP services for the
Internet Service Provider (ISP) community. They d
sh ip bgp neighbors x.x.x.x advertised-routes
- Original Message -
From: "So PaulDong"
To:
Sent: Wednesday, August 14, 2002 4:05 PM
Subject: bgp prefix number [7:51354]
> Hi all,
>
> What command can I use to find out how many prefixes I am advertising via
> bgp?
>
> Thanks in adva
sh ip bgp nei x.x.x.x advertised-routes
- Original Message -
From: "Xiaofeng"
To:
Sent: Wednesday, August 21, 2002 1:35 PM
Subject: Re: bgp prefix number [7:51354]
> I saw it in bscn trainning book:
> RTRA#sh ip bgp neigh
> BGP neighbor is 172.16.12.1, remote AS 2, internal link
> Ind
All,
Does anyone know how many voice channels the E&M interface carry ?
Thanks and best regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54475&t=54475
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
All,
Does anyone know how many voice channels the E&M interface carry ?
Thanks and best regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54476&t=54476
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
17 matches
Mail list logo