Yes for both uplink and downlink, maybe for uplink is easier than downlink
(making statics routes) but by the moment I don4t know how to make that in
both direction.
Thanks.
From: Kirankumar Patel
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Routing Question. [7:56639]
Date: Fri,
Hello Group Study!
Currently, I have a Cisco router 7513 speaking BGP4 routing protocol with 2
providers. I need to route all the national traficc for provider 1 and all
the International traficc for provider 2. How can I configure that in the
router. Can I do that based in source and
Hello.
When the problem happened, I already tried to do the point number 1 and 2
but anything change, the problem was not solved. So I and sending following
my currently BGP configuration:
router bgp A
no synchronization
bgp log-neighbor-changes
network X.X.X.X mask 255.255.240.0
network
Hello Study Group.
Currently I have 3 differents BGP sesions establish with 3 differents
providers. Each provider announce me about 115400 prefixs. Yesterday I was
making traffic load balacing between then, using the prepend comand such
others days (this actions are doing often in order to
Hello Group!
Could anybody tell me what4s mean the following log:
31w5d: %RCMD-4-RSHPORTATTEMPT: Attempted to connect to RSHELL from x.x.x.x
Maybe the IP Address x.x.x.x is making a scaning port to my router?It is
maybe an attack? I have to send a prevent message to the owner of this IP
Hello Group.
Does anybody know where can I find a complete information about the IP
Multicast tecnoloy?
Thanks.
_
Join the worlds largest e-mail service with MSN Hotmail.
http://www.hotmail.com
Message Posted at:
Thanks.
I only have to make the correct access-list for all the IP address that I
manage in the Giga interface and after to apply the command rate-limit.It is
important to know because in case of congestion problem in the WAN links
this could be a solution.
Thanks for your help.
From:
Hello Group.
Currently, I have a router Cisco 7513 with 7 WAN interfaces, 2 Fast ethernet
and 2 Giga ethernet. I can limit the BW genered by the 2 Fast Ethernet with
a Packetshaper machine but I am not allow to control the traffic in the 2
Giga Ethernet interface with the Packetshaper(the
8 matches
Mail list logo