Hi palomar,
The switch is simply connected with two networks segment. There is no
Inter-VLAN routing or EtherChannel! So the Catalyst is actived with no
configuration when connected with other switch the router can. Only with
CIsco Catalyst the one of the router IBM port come to block state. Do
e, 25 Mar 2003 12:19:25 GMT
>
>Juli,
>Make sure you don't have bridging turned up on the IBM, spanning tree may
>be
>shutting down one of the ports.
>
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Juli
>Hato
>Sent: Mo
Hi all,
I have a router IBM that has 2 ethernet ports. The IBM router connect to
Cisco Catalyst 3550 that is not configured. When the router IBM connect to
the switch one of the ethernet port from the IBM router got block by the
Cisco Switch. All you have to know is that I need to ethernet port
.if
>thats
>the case, then turn off span-tree on the IBM
>device..is that device a Blade center server?
>
>Larry Letterman
>Network Engineer
>Cisco Systems
>
>
> - Original Message -
> From: Juli Hato
> To: [EMAIL PROTECTED]
> Sent: Monda
Hi all,
I have a router IBM that has 2 ethernet ports. The IBM router connect to
Cisco Catalyst 3550 that is not configured. When the router IBM connect to
the switch one of the ethernet port from the IBM router got block by the
Cisco Switch. All you have to know is that I need to ethernet port
Halo Kenny,
Make sure the logging system is on:
Logging to sys-log server---
Logging on
Logging host Inside xxx.xxx.xxx.xxx
You cannot upgrade the PIX Firewall Signature. PIX only monitor for 59
Signature. Need more signature? Then go to IDS. An IDS can monitor up to 300
or more Signat
Congratulation Thangavel,
and thank u for sharing with us.
Best Regards,
HATO
>From: "THANGAVEL VISHNUKUMAR MUDALIAR"
>Reply-To: "THANGAVEL VISHNUKUMAR MUDALIAR"
>To: [EMAIL PROTECTED]
>Subject: Passed Cisco IP Telephony [7:58386]
>Date: Mon, 2 Dec 2002 06:30:46 GMT
>
>Hi Group,
>
>Today I pas
Halo Link Teo,
Stateful Packet Filtering as CIsco PIX Firewall has is filtering method that
considers the "state" of the TCP sessions. Also known as Context-Based
Access Control (CBAC). The benefit is offer strong security by throughly
inspecting data packets and maintaining critical addresses
Hi Sim,
You can configure PIX Firewall send the message to a syslog server when the
Active PIX in failover down, then the configure the syslog server to notify
admin via e-mail.
To make two PIX Firewall in Failover you need:
1. PIX IOS vers 5.0 or later to run Statefull Failover
2. Two PIX must
censing is pure profit. The unrestricted is the cheapest way in
>the long run but it all depends on your budget as to how you want to go.
>
>Steve
>
>-Original Message-
>From: Juli Hato [mailto:julihato@;hotmail.com]
>Sent: Tuesday, October 22, 2002 1:28 AM
>To: [EMAIL PROTECT
Dear Ciscoer,
Just wanna know why Cisco PIX also has a user Licensing methode?
AFAIK Cisco only sell the Restricted and Unrestricted License. Can anyone
here explains for me?
10-User License
The Cisco PIX 501 Firewall 10-user license supports up to 10 concurrent
source IP addresses from your in
HI here are some of the tips:
- From Higher ASA to Lower ASA --> You need NAT and Global
- From Lower ASA to Higher ASA --> You need Conduit/Access-List and Static
Best Regards,
HATO
>From: "mike greenberg"
>Reply-To: "mike greenberg"
>To: [EMAIL PROTECTED]
>Subject: Re: With PIX unable to r
3DES is subject to country implementation. So need to request to Cisco for
implementation of the 3DES.
CMIAW
Best Regards,
HATO
>From: "[EMAIL PROTECTED]"
>Reply-To: "[EMAIL PROTECTED]"
>To: [EMAIL PROTECTED]
>Subject: General PIX question DES/3DES [7:55200]
>Date: Wed, 9 Oct 2002 17:35:10 G
Hi Bruno,
When the IDS detects an unauthorized activity, the posibly action for the
sensor are:
1. TCP Reset,
2. IP Log
3. IP Block
The sensor cannot shutdown an interface and do not do a trace route to the
attackers.
CMIAW
Best Regards,
HATO
>From: "Bruno Fernandes"
>Reply-To: "Bruno Fern
Hi Neal,
You may wanna try this:
Apply the crypto map into the "Tunnel0 and the outside interface"
CMIAW
Best Regards,
HATO
>From: "Neal Rauhauser"
>Reply-To: "Neal Rauhauser"
>To: [EMAIL PROTECTED]
>Subject: IPsec - what is wrong with this config? [7:52865]
>Date: Sat, 7 Sep 2002 23:41:15 G
Try this:
http://www.cisco.com/warp/public/471/upgrading_modem_firmware.shtml
Regards,
HATO
>From: "Mel Chandler PMI"
>Reply-To: "Mel Chandler PMI"
>To: [EMAIL PROTECTED]
>Subject: 3620 RAS [7:50397]
>Date: Thu, 1 Aug 2002 16:30:17 GMT
>
>I have a 3620 that's functioning as a RAS server. We
COngrat
Bravo man
HATO
>From: "Kim Graham"
>Reply-To: "Kim Graham"
>To: [EMAIL PROTECTED]
>Subject: Re: RE: Just passed support, and completed CCNP [7:48035]
>Date: Thu, 4 Jul 2002 10:24:41 GMT
>
>It took me 5 months to complete my CCNP. At the time I was working the
>grave shift (11:30 - 7
>
>Hallo Pierre-Alex Guanel,
>Below attached the show isdn status. Please find my configuration file.
>Please check if I've wrong to configure it.
>
>Once the remote router restart, the ISDN can connect to
>HQ(isdnkotaconnect.txt)
>
>Thank YOu for helping me ^-^
>
>HATO
>
> >From: "Pierre-Alex Gua
>
>Hallo Pierre-Alex Guanel,
>Below attached the show isdn status. Please find my configuration file.
>Please check if I've wrong to configure it.
>
>Once the remote router restart, the ISDN can connect to
>HQ(isdnkotaconnect.txt)
>
>Thank YOu for helping me ^-^
>
>HATO
>
> >From: "Pierre-Alex Gua
Halo CIscoer, help me on this ISDN debug:
12:24:38: CALL_PROC pd = 8 callref = 0xF5
12:24:163208757248: ISDN BR1/4: TX -> RRr sapi = 0 tei = 64 nr = 2
12:24:45: ISDN BR1/4: RX RRr sapi = 0 tei = 64 nr = 3
12:24:193273528320: BRI1/4: wait for isdn carrier timeout, call id=0x817F
12:24:
Congratulation Scott Chapin
HATO
>From: "Amir Azhar Jamaluddin"
>Reply-To: "Amir Azhar Jamaluddin"
>To: [EMAIL PROTECTED]
>Subject: RE: Passed CCIE Written! [7:45881]
>Date: Wed, 5 Jun 2002 22:58:25 -0400
>
>Congratulation on your success. May you do well in the lab too.
>
>Bravo
>
>-nict-
>
ot;"Johnny Routin"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > tcp 1720 and udp 16384-32767 (I could be slightly off for the udp so
>please
> > verify)
> >
> > JR
> > --
> > Johnny Routin
> > The
Haloo all,
Anybody have ideas, what port number cisco used for it's "VOIP"
Thank You.
HATO
_
Chat with friends online, try MSN Messenger: http://messenger.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
What your problems?
HATO
>From: "yonghai zhang"
>Reply-To: "yonghai zhang"
>To: [EMAIL PROTECTED]
>Subject: RE: Cisco 3640-8AM ---urgent! [7:42211]
>Date: Thu, 25 Apr 2002 01:42:03 -0400
>
>hi,anyboby
>
>if you have some experience with 3640 8AM Module,can i share with you?
>
>thanks.
__
Congratulation George Zhang !
Juli Hato
CCNP, CCDP
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37516&
Would you please, make some details explanations? I don't know what you mean
" attache your module/Router to ground wire"
HATO
>From: "Muhannad Al-Shaer"
>Reply-To: "Muhannad Al-Shaer"
>To: [EMAIL PROTECTED]
>Subject: RE: Urgent Help Please! [7:36778]
>Date: Thu, 28 Feb 2002 04:37:41 -0500
>
Dear Cisco Gurus,
Help me on NM-8AM(configure for dial-in), below is the config(sorry I cannot
attached it trought Hotmail attachment facility.
**
!
logging rate-limit console 10 except errors
enable secret 5 $1$q/PI$pF86FvbJ.2wOKe6PX74SD0
username test n
Try this, if you have internet connection please cut it off. Then go to
127.0.0.1:8080
HATO
>From: "Sean Knox"
>Reply-To: "Sean Knox"
>To: [EMAIL PROTECTED]
>Subject: Dumb CCO Doc CD question... [7:34008]
>Date: Fri, 1 Feb 2002 00:42:00 -0500
>
>Whenever I try to run the documentation cd, a
The DLCI was not alive. So just bring the DLCI alive.
CMIAW
HATO
>From: "Stephane Wantou Siantou"
>Reply-To: "Stephane Wantou Siantou"
>To: [EMAIL PROTECTED]
>Subject: Help with frame-relay pvc status [7:33793]
>Date: Wed, 30 Jan 2002 20:27:50 -0500
>
>Hi everybody,
>Can anyboody tell
ne E1/R2, E1/PRI, and 8AM
>(but connected to analog phone lines).
>
>Sasa
>
>Juli Hato wrote:
> >
> > Halo E1 and AM(Analog Modem) gurus,
> > I'm currently working on Analog modem and Ei port VOIP configuration.
>For
> > the AM I can't make the
Halo E1 and AM(Analog Modem) gurus,
I'm currently working on Analog modem and Ei port VOIP configuration. For
the AM I can't make the modem pick the phone. For E1 port it seem to be the
same problem. Any sample configuration to give or tips to make it clear.
Thanks
Best Regards,
Hato
_
:(
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19723&t=19723
--
FAQ, list archives,
haloo all,
Could anyone here tell me how to connect the IBM RCU to the 2501 series
router throught the serial port at the router (1 connected to the Frame
Relay). What type of cable do we need. And how's the configuration.
Thank you.
Hato
___
me too
-Hato-
>From: "Tonton Rabena"
>Reply-To: "Tonton Rabena"
>To: [EMAIL PROTECTED]
>Subject: Re: how to build a pix firewall out of a PC box. [7:18335]
>Date: Wed, 5 Sep 2001 00:24:46 -0400
>
>count me too..
>
>""Richard"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
Please help me to figure out this link contain :). I really like to know if
somebody could tell me that some part written was wrong. Told me if I was
wrong.
http://www.cisco.com/warp/public/793/ios_fw/cbac4.html
Thanks
Hato
_
Ge
Halo, could anyone give me some example configuration using firewall that
integrated with the router (software based).
Thank you.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
ht
Congratulation Travis,
I'm just going to persue my CCNP certification, currently study for Remote
Access Certification. Do you have any suggestion to me on CCNP. :) Is it
good persuing CCNP certification with Sybex Study Guide ?
Juli Hato
>From: "Bolton, Travis"
>Repl
Congratulation Travis,
I'm just going to persue my CCNP certification, currently study for Remote
Access Certification. Do you have any suggestion to me on CCNP. :)
Juli Hato
>From: "Bolton, Travis"
>Reply-To: "Bolton, Travis"
>To: [EMAIL PROTECTED]
>
Yes sure it's will work cause the max mem for 2600 series is 64MB. Series
2600 has 2 slot by default it's 24MB.
:)
Juli Hato
>From: "Circusnuts"
>Reply-To: "Circusnuts"
>To: [EMAIL PROTECTED]
>Subject: Max RAM for a 2600 [7:11407]
>Date: Mon, 9
39 matches
Mail list logo
