Hi,
I've to upgrade a tokenring network with 1500 users to
a gigabit backbone ethernet network.
I worked my way trough the SAFE network design, but
this is not quite finanzable.
The network looks like this:
Core/distribution: two cat6500 one native IOS the
other hybride connected to a 7200 Wan router.
The access layer switches are cat6000 with inlinepower
for ip phones.
There're is a data VLAN and an aux VLAN per switch.
I have four of this switches in each building (there
are two buildings). The buildings are connected via
fibre.
I'm looking for some demo solutions.
Here is a demo config of the access layer switch,
Cat6k-acc-usr> (enable) set timezone PST -0
Cat6k-acc-usr> (enable) set summertime PST
Cat6k-acc-usr> (enable) set summertime recurring
Cat6k-acc-usr> (enable) set ntp server 10.10.0.12
Cat6k-acc-usr> (enable) set client enable
Cat6k-acc-usr> (enable) set cdp disable
Cat6k-acc-usr> (enable) set ip http server disable
Cat6k-acc-usr> (enable) set logging server 10.10.0.12
Cat6k-acc-usr> (enable) set logging timestamp enable
Cat6k-acc-usr> (enable) set port inlinepower 5/1-48
auto (module/ports)
Cat6k-acc-usr> (enable) set port speed 5/1-48 auto
Cat6k-acc-usr> (enable) set port host 5/1-48
Cat6k-acc-usr> (enable) set port inlinepower 6/1-48
auto (module/ports)
Cat6k-acc-usr> (enable) set port speed 6/1-48 auto
Cat6k-acc-usr> (enable) set port host 6/1-48
Cat6k-acc-usr> (enable) set vlan 10 floor1
10.1.10.0_data
Cat6k-acc-usr> (enable) set vlan 110 floor1
10.1.110.0_voice
Cat6k-acc-usr> (enable) set vlan 10 5/1-48
Cat6k-acc-usr> (enable) set vlan 10 6/1-48
Cat6k-acc-usr> (enable) set port auxiliaryvlan 5/1-48
110
Cat6k-acc-usr> (enable) set port auxiliaryvlan 6/1-48
110
Cat6k-acc-usr> (enable) set qos enable
Cat6k-acc-usr> (enable) set port qos 5/1-48 trust-ext
untrusted
Cat6k-acc-usr> (enable) set port qos 6/1-48 trust-ext
untrusted
Cat6k-acc-usr> (enable) set port qos 5/1-48 trust
trust-cos
Cat6k-acc-usr> (enable) set port qos 6/1-48 trust
trust-cos
Cat6k-acc-usr> (enable) set qos acl ip ACL_IP-PHONES
trust-cos ip any any
Cat6k-acc-usr> (enable) set port qos 5/1-48 vlan-based
Cat6k-acc-usr> (enable) set port qos 6/1-48 vlan-based
Cat6k-acc-usr> (enable) commit qos acl all
Cat6k-acc-usr> (enable) set qos acl map ACL_IP-PHONES
110
Cat6k-acc-usr> (enable) set qos map 2q2t tx 2 1 cos 3
Cat6k-acc-usr> (enable) set port qos 1/1 trust
trust-dscp
can you think of anything else?
thanks for your help.
Karl
=====
Karl Brenner
112 Belfield Park
Stllorgen
Co. Dublin
Tel. ++353 (1) 260 12 98
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
