Why disable cdp for back-to-back serial connection? [7:62764]

Dear all, From cisco configuration example http://www.cisco.com/en/US/tech/tk713/tk317/technologies_configuration_examp le09186a00800944ff.shtml I'm wondering that the line no cdp enable is required for both router in order to make a serial connection up for back-to-back connection.

Re: Why disable cdp for back-to-back serial connection [7:62798]

ink it's the default? So someone had to type it in, so they should have explained it. Priscilla Lawrence Law wrote: Dear all, From cisco configuration example http://www.cisco.com/en/US/tech/tk713/tk317/technologies_configuration_examp le09186a00800944ff.shtml I'm w

SNMP - Backplane OID for Catalyst 3524XL [7:14955]

Has you tried to monitor Catalyst 3524XL backplane utilization? I tried Cisco_stack_mib such as .1.3.6.1.4.1.9.5.1.1.8 and .1.3.6.1.4.1.9.5.1.1.32 but no response. Any suggestion. Thank you in advance Lawrence Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14955t=14955

FEC between two Catalyst. [7:8373]

Here is my case: 2 Catalyst 2924XL : CAT_1 configuration (simplified) ! interface FastEthernet 0/22 ! interface FastEthernet 0/23 port group 1 ! interface FastEthernet 0/24 port group 1 ! interface VLAN1 ip address