Dear Sir! I've point-to-point link between two routers with such configuration: R1---R2
R1: hostname R1 username R2 password cisco int s0 ip address 1.1.1.1 255.255.255.0 encapsulation ppp ppp authentication chap dialer in-band dialer map ip 1.1.1.2 name R2 broadcast dialer-group 1 ppp direction callout dialer-list 1 protocol ip permit R2: hostname R2 username R1 password cisco int s0 ip address 1.1.1.2 255.255.255.0 encapsulation ppp ppp authentication chap dialer in-band dialer map ip 1.1.1.1 name R1 broadcast dialer-group 1 dialer-list 1 protocol ip permit Q1: I've check it: DDR works & I can ping 1.1.1.1 from R2 or can ping 1.1.1.2 from R1, but I can't ping 1.1.1.1 from R1 or 1.1.1.2 from R2. Why? Q2: When I no generate any traffic during some time, then DDR disconnects the call (after dialer idle-timeout = 120s default, as I suppose). After that I can't, for example, ping 1.1.1.2 from R1 or ping 1.1.1.1 from R2. Why DDR not make the call automatically, even though there are interesting traffic (icmp messages)? Q3: How can I make the make DDR call manually in this example? Best regards, Nick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51498&t=51498 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]