I of course assume, you need to spoof packets for a legitimate reason,
so I'll point you in the direction of a tool you can use for just
that...
Download and install TrafficGen from www.nantech.com .Limits you to
packets to prevent malicious use
--- Steve Dispensa wrote:
> A couple of ampli
rize a thousand
questions," the source said. "I think the certification programs
realize this."
Even so, the source added that this case may influence his/her site:
"I'm thinking of moving away from actual questions and more toward
study guides
=
Nnanna Obuba ,CCIE # 6
ave failed my lab again in 2 attemp, the rs part is ok
> but
> other stuff like dlsw,ipx,voice,atm,bgp killing me cause dont have
> enough
> practice and experience in those area
=
Nnanna Obuba ,CCIE # 6586
Nantech Inc , 201 390 4795
www.nantech.com/software
Becom
Actually..a minor point of correction. I have 12.1 code running on my
3104s :)
Nnanna Obuba
CCIE # 6586
www.nantech.com/software
Become a BGP Guru for only $75 !!
--- Kelly Cobean wrote:
> Additionally, from a business and/or testing standpoint, there is no
> reason
> to take the 25
those unused fields within v1,
> say
> > subnet mask. According to Jeff Volume I, it would ignore them but
> my RIP
> > v1 router does show up the network address as well as subnet mask,
> > please advise.
> >
> > Best Regards.
> > Leo
[EMAIL PROTECTED]
trategy to
pursue financial security, then you can afford to do the stuff u love.
> Priscilla
=
Nnanna Obuba CCIE # 6586
__
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
Message
It's working 'as advertised'
Nnanna
PS if u issue the command 'no keepalive' on your serial interface, the bri
should kick in
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Cisco Nuts
Sent: Monday, February 25, 2002 4:45 PM
To: [EMAIL PROTECTED]
Subjec
I believe you can actually suppress the external routestake a look at
the link below. This actually shows you how to prevent accidental supression
of external routes, but with a little creativity, you can make it work for
you..
http://www.cisco.com/warp/public/104/10.html
Nnanna
-Ori
I Can't find this tool :(
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Chuck Larrieu
Sent: Thursday, July 05, 2001 8:30 PM
To: [EMAIL PROTECTED]
Subject: RE: FYI Check out the CCIE "whats new" page. [7:11128]
I like the CCIE verification tool ( requ
At this rate, you would think the designers of both unix and NT operating
systems were on this list...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jon Krabbenschmidt
Sent: Friday, June 01, 2001 1:38 PM
To: [EMAIL PROTECTED]
Subject: RE: another OT: wh
ted that there is no
> lisence to use it, so it should not be used.
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
=
Nnanna Obuba CCIE # 6586
www.nantech.com
Onli
ice to cover the lab test? Any comments and recommendation
> will be
> much
> > appreciated.
> >
> > Thanks,
> >
> > Kin
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclos
try tera term pro
- Original Message -
From: "Traceroute" <[EMAIL PROTECTED]>
To: "Eric Gunn" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Thursday, March 15, 2001 2:04 AM
Subject: Re: Hyperterminal programs
> check www.winfiles.com they usually have several diff
ist archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
> > _
> > Get yo
I think the issue is not to have any outbound web traffic going via the
isdn (?). If this is so, what you need is policy routing. I'll givve
you more details if this is indeed what you are trying to accomplish.
=
Nnanna Obuba CCIE # 6586
www.nantech.com
Online lab for CCIE prepar
info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
=
Nnanna Obuba CCIE # 6586
www.nantech.com
Online lab for CCIE preparation
__
Do You Yahoo!?
Yahoo
g entries that
> match...pretty cool.
>
> But my question is about the alias command itself. If you type
> "alias ?"
> there are a *bunch* of options and I have no idea what these might do
> for
> me.
>
> Do any of you have any other creative uses of this
>http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
_
> Get your FREE download of MSN Explorer at
> http://explorer.msn.co
Hi Frank,
We're 'rolling out' a full set of labs in January, there'll probably be 1 or
2 free ones, and you are right the price of lab rental is also set to
increase
cheers
Nnanna Obuba
www.nantech.com
Online lab for CCIE Preparation
- Original Message -
From: &
All you need is a few hours of practise, and I daresay
you can find that at www.nantech.com :)
Nnanna
--- Tim Ross <[EMAIL PROTECTED]> wrote:
> Is a 3920 still used in the CCIE Lab? If so, is it
> used as a major configuration problem? I haven't
> used the 3920 and have been searching for one
Voice on the CCIE lab is not extremely complex...
everything u need to know u can probably pick up in a
few hours of practise on a lab...
Nnanna
--- Brian <[EMAIL PROTECTED]> wrote:
>
> I am wanting to add voice to my lab. I was thinking
> a cheap way to do
> with was some 26xx routers and v
or a floating static route pointing to the dialer
interface...
--- "McCallum, Robert"
<[EMAIL PROTECTED]> wrote:
> Use backup interfaces. Make the dialer interface
> the backup interface for
> your radio interface.
>
> Enjoy!
>
> -Original Message-
> From: Charles Nunie [mailto:[EMAI
Because he does not know about a bug in checkpoint he
is a phony CCIE? In case you jave forgotten, CCIE
means
certified CISCO Internetwork Expert... give the guy a
break
Nnanna
--- Mark Cohen <[EMAIL PROTECTED]> wrote:
> Raul-
>
> I brought down the local checkpoint firewall by
> pingi
just buy a 2502 for about $450 instead
--- Keith Townsend <[EMAIL PROTECTED]> wrote:
> $375 is a good fair price if it has IOS 12.0
> Enterprise otherwise you can
> get them for about $250 all day on ebay.
>
> Hope this helps.
> ""Jojo"" <[EMAIL PROTECTED]> wrote in message
> 001101c02a89$f226f
Let's say we have a 2 lane and a 5 lane road, 2 cars
travel at the same speed over those roads,and neither
experiences traffic, which will do 100 miles first?
--- Frank <[EMAIL PROTECTED]> wrote:
> Let's say we have a 10Mbps and 100Mbps interface.
> Both transmit the same
> sized
> frame over
hey stuart,
make sure you are using a crossover cable if you are
connecting the routers directly (without a hub)
Nnanna
--- ekundayo taiwo <[EMAIL PROTECTED]> wrote:
> Hi, stuart,
>
> I think the best advice is to go and get a CCNA,
> book. Falling that you'll need another router to be
> the
There are actually about 5,000 CCIEsPeople who passed the exam recently
got numbers in the 61xx range, and we all know the first CCIE was 1024
Nnanna
www.nantech.com
online lab for CCIE preparation
- Original Message -
From: "William E Gragido" <[EMAIL PROTECTED]>
To: "Brian" <[EMAIL
Exams are exams, they test you on specific topics, they don't make you God.
Nnanna
www.nantech.com
online lab for CCIE preparation
- Original Message -
From: "Phil Barker" <[EMAIL PROTECTED]>
To: "Chuck Larrieu" <[EMAIL PROTECTED]>; "Priscilla Oppenheimer"
<[EMAIL PROTECTED]>; "Derek CHUN
Hi all,
I'm having a problem with my 3600 router. When I boot it up,
the screen just shows a whole bunch of 'C's, the system light flashes to show
it's in rommon mode. 'm using this same hyperterminal config to access other
routers. Does any one have any idea what's going on?
Cheers
Nna
Hey Brad,
You really need to take it easy with knocking other people's lab, just
because you are affiliated with ccbootcamp, no one says their lab is bad,
but hey an LS1010 is an LS1010 wherever it may be located...let people
decide which lab best suits their needs. I hope Paul is listening
Nnan
Think of a 2501 with a free hub attached, that' what a 2505 or 2507 is..
Nnanna
www.nantech.com
online lab for CCIE preparation
- Original Message -
From: "Rossetti, Stan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, August 08, 2000 2:34 PM
Subject: 2505/2507 Uses
> Could
You can rent lab time at www.nantech.com ..very reasonable prices :). As for
physically having the equipment in your house, I doubt you'll be very
pleased with the rates if you do find someone to rent from
Nnanna
--
www.nantech.com
online lab for CCIE preparation
"timand" <[EMAIL PROTECTED]> w
you can get ATM and VoIP practise at www.nantech.com
cheers
Nnanna
www.nantech.com
online lab for CCIE preparation
- Original Message -
From: "Dennis E. Bates" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 06, 2000 4:33 PM
Subject: If u had to take one class
> Hi Gr
I hereby rise in defense of Brad...just cos a guy wants to make extra money
does not make him a bad guy.
Having defended him so heartily, you guys should please check ot
www.nantech.com, we now have ATM equipment
Nnanna
- Original Message -
From: "Sam Adams" <[EMAIL PROTECTED]>
To: <[EM
While you are at it, check out www.nantech.com , the
ATM equipment is arriving next week !!
--- Jeremiah Rutherford <[EMAIL PROTECTED]>
wrote:
> Hello, Everyone
>
> I hope everybody had a good holiday. Hey I talked
> to a couple of guys who
> are starting a new Lab study site. It is suppose
Hi guys,
I have 1 2509, 2 2501s , 1 2507 and 1 4000 (4 serial 1 token
ring), that I no longer need... I planned to sell them on ebay, but decided to
offer them here first.
So if any one is interested please let me know... I'll wait a
few days, then post them on ebay
cheers
Nnanna
Hey Bike man,
Try www.nantech.com , there's everything but ATM, and
even that will be added in a month or so...not to
mention it's cheap and available
cheers
Nnanna
--- Lawrence Dwyer <[EMAIL PROTECTED]> wrote:
> Rudi,
> Mine resources are similiar. Same books, Doyle,
> Caslow, Thomas,
> H
Hey guys,
Check out www.nantech.com
Hi all,
Does anyone know if the 5213A module on the cat 5000 supports
ISL?
TIA
Nnanna
Try www.soultionlabs.com as well. They seem to be the least expensive of
them all
- Original Message -
From: "Jon Mendoza" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, May 11, 2000 11:03 AM
Subject: Links and Information to Virtual Labs...
> Hello
40 matches
Mail list logo