if all the ports on access layer switch is in the same VLAN, you can not do that.
Spantree will only allow one path forwarding packets.
Michael Yu
[EMAIL PROTECTED]
Alldread AK2 Robert J wrote:
> I would like some opinions on load balancing across (2) 6509 switches using
> trunk ports.
>
> Here is the scenario...
>
> 1 switch at the access layer, 2 switches and the distribution layer. The
> access layer switch has a GIG trunk link to each of the 2 dist layer
> switches. How would I implement equal-cost load balancing in a round robin
> fashion from the access layer switch to each of the 2 dist layer switches.
>
> I would like to do this on a packet by packet level. CCO has some good tips,
> but only for load balancing from 1 switch to 1 switch, not 1 switch to 2
> switches.
>
> Any advice and help would be greatly appreciated.
>
> Skin-e
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
