what the rest
of their network looks like), and the home pc's could be built cooke cutter,
too. They could save a ton of money on man hours if layer 8 wasn't in the
way.
-Rob Fielding CCIE #7996
- Original Message -
From: Chuck Larrieu
To:
Sent: Saturday, September 01, 2001 6:43 AM
address. No need for statics at all.
Does the customer have any issues about this type of config?
-Rob Fielding CCIE #7996
- Original Message -
From: Chuck Larrieu
To:
Sent: Thursday, August 30, 2001 10:38 PM
Subject: RE: I have a customer who... food for thought - static routes
[7
to
the rest of the corporate network. Since security is a concern, then I
would suggest an access list on the 827s to only allow established
connections inbound.
-Rob Fielding CCIE #7996
- Original Message -
From: Chuck Larrieu
To: Rob Fielding ;
Sent: Friday, August 31, 2001 5:07 PM
this on cisco.com, and on the doc cd.
-Rob Fielding CCIE #7996
- Original Message -
From: Dwayne Saunders
To:
Sent: Thursday, August 30, 2001 6:41 PM
Subject: ospf [7:18002]
Hi all,
is any one able to direct me in the right direction or be able to
explain what the (DNA
drills later. Get on the Groupstudy CCIE Lab list, buy the bootcamp labs,
and get some routers to practice on. Go to the ECP1 class if you can. Good
luck to you.
-Rob Fielding CCIE #7996
- Original Message -
From:
To:
Sent: Tuesday, August 28, 2001 11:19 PM
Subject: CCIE Lab Prep
This is not a direct answer to your question, but you might be interested to
read this. This paper describes one strange situation in which ospf routes
don't get into the routing table:
http://www.cisco.com/warp/public/104/10.html
-Rob Fielding
- Original Message -
From: Padhu (LFG
3Com's gig trunking protocol is proprietary. Its a load sharing method
similar to Cisco's fast etherchannel concept. The 6506 won't know what to
do with it. Their gig modules will talk to each other, and both support
802.1q, but you cannot load share links between them.
-Rob Fielding
and give away
$1000 to Cisco. Wish me luck.
-Rob Fielding
configs.
-Rob Fielding, MCSE, CCNP
- Original Message -
From: "Wilson, Christian" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 01, 2000 11:31 AM
Subject: OPSF Adj problems
Hi all
I have a lab with 4 1602 routers. I have 2 of them, RARB, ospf over nbma
f
configs.
-Rob Fielding, MCSE, CCNP
- Original Message -
From: "Wilson, Christian" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 01, 2000 11:31 AM
Subject: OPSF Adj problems
Hi all
I have a lab with 4 1602 routers. I have 2 of them, RARB, ospf over nbma
f
Do a show run. Somewhere near the top, there should be a line that says
"service config". Remove it by typing "no service config" in global config
mode.
-Rob Fielding, CCNP
- Original Message -
From: "Roger Wright" [EMAIL PROTECTED]
To: [EMAIL PROTECT
, the
Exam Cram book, boson #2, Priscilla Oppenheimer's flash cards, and threads
on this list. Thank you, Priscilla for your excellent flash cards, and
thanks to everyone on this list once again.
-Rob Fielding CCNP, MCSE
12 matches
Mail list logo