I just want to thank those who provided insight to the problem I was
experiencing with Firewall access through VLAN's. When I tried to add an
iside route statement as suggested, the firewall didn't take it. I looked at
the version code and noticed it was 4.4(4)!! Yikes! Needles to say, an
upgrade
Hi guys,
I have been trying to locate info on how to utilize one DHCP server for
multiple VLAN's on campus. So far I have come across utilizing a multi-vlan
port configuration and IP helper addresses, but I am using 3524's and 6506
w/MSFC. If you have had any experience with this, I
I am not understanding the concept of using an IP address followed by /n.
Example 10.20.193.20 /28. The way I am looking at it I get a Subnet mask of
255.255.255.240. But I am being told that it is really a mask of 255.255.240.0,
however I am not being given an explanation. I thought that
-Original Message-From:
Robert Cabeca [EMAIL PROTECTED]To: [EMAIL PROTECTED] [EMAIL PROTECTED]Date:
Monday, October 16, 2000 13:40Subject: NAT, Seconday /or
VLAN??
All,
I have been confused about the best way to go about this. I don't think
there is an easy way. Any input would
All,
I have been confused about the best way to go about this. I don't think
there is an easy way. Any input would be appreciated.
I have been blessed with the task of developing a new IP scheme w/Vlans
phasing out the old ones. The current IP scheme is a class B (159.159.0.0
255.255.0.0)
Also try enabling proxy-arp on the router interfaces.
-Original Message-
From: jeongwoo park [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Tuesday, July 11, 2000 22:19
Subject: RE: Cisco routers and DHCP server
Here is full command that i know of.
interface ethernet 0
Just want to say that this was a great and useful response!!
Rob
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Tuesday, June 27, 2000 19:51
Subject: Which access-list increase load the most?
It depends (well, what did you
Try using the "IP Proxy-arp" command on the remote Cisco router. It will
work with the helper address.
Robert
-Original Message-
From: SH Wesson [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, June 19, 2000 19:34
Subject: helper address and bay router
I have a
8 matches
Mail list logo