Edward Solomon wrote:
>
> To my knowledge, this is not strictly true. E1 timeslot 0 is
> always used for framing.
You can have E1 line with all 32 timeslots used for data. It
works, really, we have such lines. But, if the line is too
long, there could be problems and you could receive 'frame sli
Chan Dovelet wrote:
>
> Can I use SNMP to get their config? What is the MIB id?
Variable is:
writeNet OBJECT IDENTIFIER ::= { lsystem 55 }
writeNet OBJECT-TYPE
SYNTAX DisplayString
ACCESS write-only
STATUS mandatory
DESCRIPTION "Write configuration t
Just found great book on CCO!
IPSec Design Guide - 2.2 MB, 444 pages. Enjoy !
http://www.cisco.com/cpropart/sync-src/ccstcp/cc/techno/protocol/ipsecur/ipsec/tech/ipsc_dg.pdf
Sasa
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, li
> is there a way to check if the router is a 7500 or a 7200 by using sh ver.
Mine 7206 says:
#show version
...
cisco 7206 (NPE200) processor with 122880K/8192K bytes of memory.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ
rucha wrote:
>
> Can anyone give me the detail information about the "AS53-E1-60DM"
> which is the modem module of the AS5300,cisco decript the "60 MICA
> Modems_, 1 MICA CC and 1 Quad E1/PRI Card",I don't know what's the
> "1MICA CC".Thanks!
MICA CC is 'mica carrier card'. It is card th
yu hao wrote:
>
> Can anybody kindly tell me the pinout of cable E1-Pri(DB15-RJ48)
> used on moudle CE1/Pri of 2600 or 3600 serial.
I've made lot of this cables. Here it is:
RJ-45 DB-15
= =
1 8
2 15
4 9
5 2
Regards,
Sasa, CCNP
xuhaicheng wrote:
>
> 1.how can i verify the all E1 channel from 1 to 31 is available in the as5300
show isdn service
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.co
John Neiberger wrote:
>
> I'm going to be adding 8 MB of FLASH to a 2520 that already has 8 MB. Will
> adding the new SIMM cause me to lose the IOS image currently residing in the
> existing SIMM? I suppose this is a moot question because I'll be upgrading
> the IOS immediately afterward, but I
> jack wrote:
>
> Does any one know if there are any access lists to configure on
> the cisco 775 Isdn router? (I have a cisco 775 for the connection
> to the Internet and I want to block ICQ from my LAN)
Yes, there are filters. Take a look at 'set ip filter',
'reset ip filter' and 'show ip fi
Frank Wells wrote:
>
> I have been looking on CCO to get the factory specs of a 3620
> router but it is not very clear what interfaces it ships with.
Hi Frank,
3620 and 3640 don't have any interfaces built-in. You have to order
everything. 3660 has built-in 10/100 Mbps ethernet.
__
John Neiberger wrote:
>
> Hmmm I wonder if IP accounting info is available through a MIB? I'll
Yes, it is. Here is what you need:
1) Read actCheckPoint.0
2) Then, set actCheckPoint to the same value that you have read.
Now, db is checkpointed.
3) Read (in loop) LipCkAccountEntry, which
Jim Bond wrote:
>
> "aaa authentication ppp if-needed: does not
> authenticate if user has already been authenticated on
> a TTY line". What does it mean?
You have two options for user authentication:
- PPP authentication PAP/CHAP (after PPP starts),
- Username/Password prompt on tty line.
In s
> Chris McCoy wrote:
>
>Does anyone know how to add more VTY lines in newer versions of IOS?
> One used to be able to specify more lines by specifying a higher number
> than the usual '4' in the range of the 'line vty' statement. e.g. to make
> 11 lines:
It works on mine AS5300/12.0
(confi
> Suresh_Kumar wrote:
>
> How the MX entry and the www entry of a dns server go together when the
> mail server and the web hosting server are with two different ISPs of
> different locations.
Suresh,
no problems for that. DNS servers for the domain will be hosted
on the DNS servers of one prov
14 matches
Mail list logo
