Mamoor,
To my knowledge, the only 1700 series router that supports IEEE 802.1Q VLAN
is the 1751. The fast ethernet interface may require the encapsulation
dot1q command, rather than the encapsulation isl command.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12030&t=12024
You may want to verify the version of RIP that you're running on all
routers.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12067&t=11966
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
Transmit pairs are 3 and 6, and Receive are 4 and 5 for Token Ring RJ45
interfaces.
Fabricate a patch cable pinned out to the 568-B wiring standard on one end,
and change the other end to cross transmit an receive pairs.
End A
Pin 1 OrangeWhite
Pin 2 Orange
Pin 3 GreenWhite
Pin 4 Blue
Pin 5 Blu
When you say you have a 256k channelized E1, what do you mean?
Is it a fractional point-to-point circuit?
What encapsulation method are you using for layer 2?
Could you elaborate on the application?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12076&t=11903
What it is:
Proxy ARP is a method by which routers make themselves available to hosts
that do not have a configured default gateway. Proxy ARP is enabled on
Cisco routers by default.
no ip proxy arp is the command to disable Proxy Arp on a per interface basis.
Consider the following:
Host A
You may find this white paper useful.
http://www.microtest.com/omniscanner/cat6_why.pdf
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13806&t=13741
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/c
Never heard of one.
Who is the Service Provider for the T1 in question?
Ted Dronen
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14406&t=14397
--
FAQ, list archives, and subscription info: http://www.groupstudy.
7 matches
Mail list logo