Ok,I'll try it without the access lists...but I guess access list '99' has
to remain 'cause it's tied to Dialer list 2. Right ???
cheers.
-Uche.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11682&t=11653
--
FAQ, list archi
Hey Phil,
'WHY'...is what I've been asking myself for the past 7 days.
cheers..
be glad to receive any brainwaves.
-Uche.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11680&t=11653
--
FAQ, list archives, and s
I just simply connected the router to the isdn network-over BRI, and tried
to dial in to the internet...remember that 'ip' was specified as interesting
traffic(see config)?...so what went wrong then?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11677&t=11653
-
Christian,
I have IOS version 12.0. currently running..see config below I also
configured the line as ppp multilink..just check out the config, and let
me know what's wrong.
PS: Are u in Germany by any chance - please let me know.
cheers!
config->
oks#sh conf
Using 1721 ou
Debug ppp seems to be issuing no results. However this the outcome of the
other debug querries.
oks#
oks#sh isdn st
Global ISDN Switchtype = basic-net3
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI =
...*LOL*.thx so much for your consideration Charlie!
This router is beginning to push me off the edge!
Is there anything else that could possibly be done?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11671&t=11653
--
FAQ, l
Hello,...
I changed my configuration somewhat, and removed a module. But my cisco
2620 still wont dial out.!!.can someone look at the configuration and
the error out put and let me know what may still be the cause.(Layer 1. and
layer 2. -isdn events- are ok, but theres still no connection)
Hello Jenny,
currently the lights are blinking, but there seems to be no data-traffic.
you might want to take a look at my current config.
-Uche.
ps: this is the only message i keep on receiving upon implementing debug
isdn q921/9931 !>
00:36:15: No dialer db, manual isdn call can't
dear nrf,
you are only partially right. When you use the "dialer map" statement
instead of the "dialer string" statement, the ppp authent. chap is
DEFINATELY REQUIRED. However it is true that you can still use ppp auth chap
with dialer strings.
cheers!
still me--->U.
PS: Can you give me advi
dear nrf,
you are only partially right. When you use the "dialer map" statement
instead of the "dialer string" statement, the ppp authent. chap is
DEFINATELY REQUIRED. However it is true that you can still use ppp auth chap
with dialer strings.
cheers!
still me--->U.
PS: Can you give me advi
I second!...It's just blocking my mailbox...pls remove.
Cheers!
-Uche.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11096&t=11091
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repor
tried changing the Isdn switch type, then got this message:--->
08:34:32: No dialer db, manual isdn call can't dial out
So, it cant be that i guess. Anyhow, the service provider is Deutsche
Telekomm ,so i guess they MUST already support it already I suppose!
Thanx alot for the hintand keep
HELP!,
Now I'm ONLY getting this error message--->
08:34:32: No dialer db, manual isdn call can't dial out
Whats wrong???I'm at my witts end!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11076&t=11045
--
F
This is true alright Charles,
but it isnt a must that the "dialer map" statement is used. you can also
use the "dialer string" statement.it all depends on wether you are using
the ppp authentication "chap" command.
This is not where my problem lies.
Thanx for your effort anyway. cheers!
-u
Hey Phil,
Here it is:
Cheers-->
oks#sh isdn stat bri1/0
Global ISDN Switchtype = basic-net3
ISDN BRI1/0 interface
dsl 8, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 65, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
La
Who can help me? I am trying to get cisco2620 modular router to route out
of it's bri interface. can anyone help? below you will find a copy of th
current configurationthe only significant interface to look out for here
is Bri1/0 ...This is the interface i am testing with at the moment. You
16 matches
Mail list logo