You dont have enough free space in your flash to hold the new image ..free
it up or upload a IP only image via xmodem and then upgrade it to the
required one ...
Ziyad
- Original Message -
From: "landcai"
To:
Sent: Wednesday, January 30, 2002 1:31 PM
Subject: using xmodem
Hi All
I have 2 4500. Both are facing same problem.Wheneevr router boots it
gets stuck on this screen
Would you like to enter initial configuration dialogure box [y/n]
The console cable is OK.There is no problem with the hyper teminal software
as
all other routers are working fine with t
Mark
I understand but I mentioned in my query that router "stucks" on that
line and takes no input (y/n).in short it hangs.I have changed the
console cable and the terminal emulation software but the problem is same
,,,
Ziyad
- Original Message -
From: "Mark
ay, February 13, 2002 1:50 AM
Subject: RE: 4000 Router Stucks . [7:35164]
> Ziyad- if you got no response from the console using your Terminal
Emulation
> software, then you probably should verify that the config-register is set
> correctly.
>
> Rest the router, and within t
what switch did you use for xmodem ???
- Original Message -
From: "Wilson, Christian"
To:
Sent: Tuesday, February 12, 2002 7:26 PM
Subject: Flash upgrade disaster [7:35184]
> Begging for help once again . . .
>
> I have upgraded the flash in a 3640 from the 8 Mb chip to a 16 Mb chip.
I think you eitehr have ip only or ip plus image. You will be needing an
Enterprise feature set IOS for adding vty lines..Check out for a "j"in the
new IOS
Ziyad
- Original Message -
From: "A Mehr"
To:
Sent: Tuesday, February 12, 2002 7:50 PM
Subject: Adding more V
Chuck
Congratz, Congratz, Contratz...
Ziyad
- Original Message -
From: "Chuck Church"
To:
Sent: Wednesday, February 13, 2002 5:46 PM
Subject: Whew! CCIE 8776! [7:35257]
> All,
>
> I think the title says it all. Took the lab today at RTP. 4th time
> was th
Chuck
Congratz, Congratz, Contratz...
Ziyad
- Original Message -
From: "Chuck Church"
To:
Sent: Wednesday, February 13, 2002 5:46 PM
Subject: Whew! CCIE 8776! [7:35257]
> All,
>
> I think the title says it all. Took the lab today at RTP. 4th time
> was th
Hi All
Can anyone please tell me the difference between the folowing
statements.
1) deny tcp any any
2) deny ip any any
3) deny any any
Ziyaad
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36595&t=36595
--
FAQ, list arc
Hi All
Can anyone tell me if I can use MRTG for monitoring CRC errors or broadcast
??? I am already running MRTG for monitoring Bandwidth and CPU Utilization
...What are other things in a Ciso Router that can be meausured through
MRTG.
Ziyaad
Message Posted at:
http://www.groupstudy.com/
M
Subject: RE: Monitoring Cisco Router through MRTG [7:36598]
> Everything. Try a tool called getif to find out the SNMP OID's for ur
> device. Do not forget to scan the device using SNMPv2.
>
> Regds
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
the
correct levels.
Let me know if it helps
Ziyad
- Original Message -
From: "Richard Tufaro"
To:
Sent: Thursday, February 28, 2002 9:01 AM
Subject: Cisco CPU [7:36765]
> Hey guys..a little off topic but where is the BEST place to find out how
to
> install and configure
12 matches
Mail list logo