I set the cat6k reg to 0x3922, howto recover [7:27934]

Hi,all Last Friday,I go out to solve a cat6k's boot problem,Its a Cat6K with 6006 chassis,supervisor 1a msfc2 and one ws-x6408 line card,the boot problem is:after it decompress the image and displays four lines of diag message ,the system is halted at "boot bootflash:cat6000-xxx.bin",at that t

Where is the position of Cat6k's config [7:27935]

Does Cat6K also using an NVRAM for keeping the configuring or simulating the flash link 2900xl. and if the config is in NVRAM what the nomally bootvar is? I can only enter the rommon mode, the system cannot boot correctly. I have try to use "boot bootflash:cat6000xxx.bin" and confreg 0x2142 ,neith

Can I use the xmodem -s 38400 in Cat6K [7:27936]

I found a doc about howto use xmodem to recover the image of cat5000&4000,it says you can use the xmodem -s 38400 to download via console.And I also found a topic says recommand not to set the speed upper than 19200,the xmodem command has some option: -c to use crc16 -s set speed I am using the t