Hi, you need to configure dial-peers on your router, depends on what you want to do. 1. if you need just to receive calls on your router, you just have to configure dial-peer voice # pots destination-pattern #phone number port #of port to which you assigned the phone number
2. if you need to initiate voip calls from your router, you have to configure dial-peer voip dial-peer voice # voip destination-pattern # phone number that you want to attempt session target ipv4:@ip of destination tese are basic commands that you have to enter, now you may need additional commands, for this, refer to cisco web site. you have fxo ports, that means that you'll connect a pbx to your router I think, and not a phone, some other comands will be needed ""Hamed"" a icrit dans le message news: [EMAIL PROTECTED] > Hi > We want to configure cisco3660 for VOIP termination(Just Termination) > We have 6 VIC-2FXO (12 Line PSTN) . > our router has 2 LAN port that one of them is connected to Internet and one > another is shutdown. > A company would like to send their traffic for termination. > Please help me to configure this router for termination and tell me how can > I configure it. (Which commands are necessary for termination) > > Regards. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30175&t=30031 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]