OC3 VXR compatible [7:35214]

I think that you need a minimum hardware requirement of 2.0 and I want to know if you can check that via part number. Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35214&t=35214 -- FAQ, list archives, and subscription info

OC3 VXR compatible [7:35205]

I have a PA-A3-OC3SMI module and I do not have any way to test it. How an I tell if it is VXR compatible from just the model number? Joe Carr MCDBA, CCDA, CCNP, CCIE (written) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35205&t=35205 --

VIP2 microcode [7:34511]

Daniel thanks daniel I will take a look at that latter, but what about the microcode? Does that have anything to do with it? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34511&t=34511 -- FAQ, list archives, and subscripti

VIP2 microcode [7:34504]

I have a vip2 rsm combo and I am unable to see an atm module in the vip2. This happened after I upgraded the IOS to 21.1(10) on the rsm. I have been doing some research and I think it may have to do with a microcode that is invalid for the 12.1 software. If so then were can I get an upgraded micro

VIP2 Issue [7:34330]

Here is the deal, I have a cat5000 with a sup III an RSM (ws-x5302) and a VIP2 with an ATM OC3 module installed (PA-A3-OC3SMI). I cannot see the ATM OC3 from the RSM. From the sup III I see the expansion module but after I session into the RSM nothing on a show run or a show int. This happened aft