Hi everybody;I configured a 2610 router with VIC-BRI S/T TE and NM-2V voice module for VoIP applications.The router runs with IOS c2600-is-mz.120-7.XK1. But I could not achived to make voice call with remote site. Actually when I dial my local number I get too high dial tone and could not dial remote site, vice-versa...The configuration is like below... ! interface BRI1/0 no ip address no ip directed-broadcast isdn switch-type basic-net3 isdn incoming-voice voice isdn sending-complete isdn static-tei 0 !voice-port 1/0/0 ! voice-port 1/0/1 ! dial-peer voice 1 pots destination-pattern 201 port 1/0/0 prefix 0 ! dial-peer voice 2 pots destination-pattern 202 port 1/0/1 ! dial-peer voice 10 voip destination-pattern 101 session target ipv4:X.X.X.X! Thanks alot...Murat EMEL
------------------------------------------------------------------------ Chat with friends online, try MSN Messenger: Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35604&t=35604 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]