Folks,
I am troubleshooting the 3524XL and get the following message at the boot.
C3500XL POST FAILURE: front-end post: GigabitEthernet0/2:
C3500XL POST FAILURE: looped-back packet not received
It is connected to 2950G-24. 2950 is seeing the 3524XL via CDP, but not
vice versa.
Has anyone s
Firesox 7/18/03 6:03:15 AM >>>
>Folks,
>I am troubleshooting the 3524XL and get the following message at the boot.
>
>C3500XL POST FAILURE: front-end post: GigabitEthernet0/2:
>
>C3500XL POST FAILURE: looped-back packet not received
>
>It is connected to 2950G-24. 2950 is seeing the 3524XL vi
fiber
connection - I'll leave that to those with more experience in that area to
describe the proper method to use.
> -Original Message-
> From: Firesox [mailto:[EMAIL PROTECTED]
> Sent: Friday, July 18, 2003 6:20 AM
> To: [EMAIL PROTECTED]
> Subject: 3524XL Er
Yes, I have seen it on one of my boxes. It's a hardware problem. Open a TAC
case and they'll probably RMA it.
Shawn K.
-Original Message-
From: Firesox [mailto:[EMAIL PROTECTED]
Sent: Friday, July 18, 2003 7:20 AM
To: [EMAIL PROTECTED]
Subject: 3524XL Error Message [7:72563]
July 18, 2003 7:20 AM
> To: [EMAIL PROTECTED]
> Subject: 3524XL Error Message [7:72563]
>
> Folks,
> I am troubleshooting the 3524XL and get the following message at the boot.
>
> C3500XL POST FAILURE: front-end post: GigabitEthernet0/2:
>
> C3500XL POST FAILURE: looped-back pack
interfaces send a keepalive-type loopback packet every x no of seconds to
verify the interface's integrity. same thing happens at POST.
The message means faulty Hardware. More specifically, it is probably the Rx
of your interface that has failed.
Solution=Hardware replacement.
-Nakul
""Firesox""
6 matches
Mail list logo