Hi,
I 'm buying a ATM to Frame-Relay virtual circuit with 384Kbps Peak Cell Rate
and 192Kbps Sustain Cell Rate. From what I have read and observed, with
this setup, you can never send a sustain throughput higher than the SCR(THe
max I ever get is 165Kbps sustain). You may burst momentarily at th
I believe in this case, your ATM SCR = FR CIR in the network, so if you set
it at 384PCR 384SCR on the router, then you are telling the router to push
the traffic and treat this PVC as a 384K pipe.
At the same time, your FR side and the provider network sees traffic coming
in at 384, but it knows
Thanks for the response. It is Singtel and I'm not sure what they are
using.
See In-line comments.
TD
""Paul Jin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I believe in this case, your ATM SCR = FR CIR in the network, so if you
set
> it at 384PCR 384SCR on the router, then
Well, good luck on getting your service straightened out.
Frame and ATM internetworking is relatively new so lots of tweaks have to be
done. including on the provider end.
We are trying to tweak some parameters now for some of our customers
running the same type of service.
But as far as your s
Sent: Friday, October 26, 2001 6:15 PM
To: [EMAIL PROTECTED]
Subject: Re: ATM/FR Interworking [7:24190]
Well, good luck on getting your service straightened out.
Frame and ATM internetworking is relatively new so lots of tweaks have to be
done. including on the provider end.
We are trying
5 matches
Mail list logo
