hi friends 2 of my sites got connected through aux ports of 2- cisco 2610 routers. speed is very poor. end users are very much frustrated to work. before that both sites were connected through Windows-NT RAS servers with D-link modems. no problem at all that time. can u pls suggest few commands which will improve the speed between 2 sites through aux ports of my 2610 routers. i am attaching IOS configuration interface Async65 ip address XXX 255.255.255.0 encapsulation ppp dialer in-band dialer rotary-group 1 async mode dedicated interface Dialer1 ip address XXX 255.255.255.0 encapsulation ppp dialer in-band dialer idle-timeout 600 dialer map ip XXX name XXX broadcast 111111 dialer hold-queue 20 timeout 10 dialer-group 1 ppp callback request ppp authentication pap ppp pap sent-username YYY password YYY line aux 0 modem InOut modem autoconfigure discovery transport input all autohangup stopbits 1 speed 115200 flowcontrol hardware line vty 0 4 password obt login ip route 192.168.1.0 255.255.255.0 192.168.89.31 ip route 192.168.89.31 255.255.255.255 Dialer1 ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1522&t=1522 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]