Hi,
I am doing a study on DDR. On my router, I configured the bri0 interface, and
it works fine. The router can place a call to the other end and traffic
passes through
perfectly. (It means all the isdn interface and dialer configuration are
correct).
My problem is, once i placed the interf
the SHUT command on your primary interface will not bring the backup
interface up. so what you are seeing is definitely normal. if your backup
interface DID come up from a shut command on your primary interface, then
I'd say you have a broken router!
try using a floating static route instead...
I think that this is a normal behaviour. The bri interface works until i put the
backup interface statement at s0. So it must be that the back up statment cause
the interface to be in standby
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.h
Since this is frame relay, an easy way to test it is to change your LMI type
on the interface to a type not being used and within 10/15 seconds the
interface will go down and the backup interface should go active.
Also, Backup does not work on multipoint sub-interfaces with the loss of a
PVC.
J
PROTECTED]]On Behalf Of
Brad Ellis
Sent: Thursday, May 25, 2000 7:13 PM
To: [EMAIL PROTECTED]
Subject: Re: Backup interface never comes up.
the SHUT command on your primary interface will not bring the backup
interface up. so what you are seeing is definitely normal. if your backup
interface
Also the router is smart enough not to dial a backup interface if you shut
the primary interface down on the router. You need to pull the cable or
shutdown the far end.
--
Dave
CCNP/CCDP/CCAI
"James Xie" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
>
6 matches
Mail list logo