Hi All, I have a question on "no bridge xx route ip" command, what I want is to disable IP routing inside the bridge group, but I found after I use this command, router still routes the IP packets. My configuration is as follows: .2 172.10.37.0/24 .1 .1 172.10.36.0/24 .2 R7 -------------------------------- R3 ---------------------------- R6 The configuration on R7 and R6 as usual, no bridge group is configured on them, on R3, I have(stripped): bridge irb ! interface GigabitEthernet1/0/0 ip address 172.10.37.1 255.255.255.0 no ip route-cache distributed no ip mroute-cache load-interval 30 negotiation auto bridge-group 1 ! interface FastEthernet2/0/0 ip address 172.10.36.1 255.255.255.0 no ip route-cache distributed no ip mroute-cache half-duplex bridge-group 1 ! bridge 1 protocol ieee But on R7 I still could ping 172.10.36.2, after I use "no ip routing", then it failed, so my question what is the relationship between "no bridge xx route ip" and "no ip routing", why after I run the first command, ip routing is still enabled in the bridge group? Thanks, Jerry Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8917&t=8917 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]