D]>
>To: [EMAIL PROTECTED]
>Subject: Re: CCIE Lab - ISDN Simulator
>Date: Thu, 19 Oct 2000 22:08:01 -0400
>
>It might be cheaper out of the pocket but after 2 months or more , a
>simulator is cheaper since you can sell it (if it's in decent shape) for
>about 80% of the pr
It might be cheaper out of the pocket but after 2 months or more , a
simulator is cheaper since you can sell it (if it's in decent shape) for
about 80% of the price you had paid for at ebay. A teltone simulator can be
bought at ebay at around $1850 and you can probably sell it back at around
$1700
An Adtran Atlas 550 is alot less expensive and you only loose the ability to
have DS-3 interfaces. But you'll still spend more than installing a couple
of BRI's for 6 months. I doubt you'll find any Atlases on the used market.
Rodgers Moore
""FRS"" <[EMAIL PROTECTED]> wrote in message 8smth4$kv
On Thu, 19 Oct 2000, FRS wrote:
> Thanks Brian!
> I have a 2524 and a 2516.
> Do you perhaps know the part numbers that I need to make your setup work as
> outlined below?
no special part numbers or setup. If you have a 2524 ISDN S/T module then
you are set. Both routers have S/T interface
Personally, the simulators seem too expensive. For example, you *might*
be able to get one for like $1500.00. Well to get an ISDN line at your
house is probably only about $200.00 install and maybe $70-$80 a month.
You only need 1 ISDN line. It has 2 channels. You just use an external
NT1 an
did you check out the CIM CDs that ciscopress just released? the routing
ones are pretty good
-Original Message-
From: FRS [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 19, 2000 12:38 PM
To: [EMAIL PROTECTED]
Subject: CCIE Lab - ISDN Simulator
Hi,
I am looking for recommendations
Thanks Brian!
I have a 2524 and a 2516.
Do you perhaps know the part numbers that I need to make your setup work as
outlined below?
Many thanks.
"Brian" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Personally, the simulators seem too expensive. For ex
Hi,
I am looking for recommendations for a ISDN simulator in preparation for the
CCIE Lab exam. Is there a simulator used in the lab exam and if yes, what
type?
I have heard that I should get an Adtran Atlas 800 Switch with 2 BRI
interfaces. Does anyone know the estimated cost of this unit, used
8 matches
Mail list logo
