Hi
I have a Cisco 2651 with two Fast Ethernet interfaces. I have accidentally
installed a Cisco 2600 IOS image. now when I do a "show run" the interfaces
are not there anymore. I tried to make it to boot from boot but the
interfaces is not showing up.
If you can give me some help, that woul
To reinstall the IOS on a 2600 with an incorrect image, you will need to
use TFTP from ROMMON.
http://www.cisco.com/warp/public/471/76.html
Make sure the image that you download is correct for the exact 2600
model you have. For the 2651, depending on what you want to do, I would
use a 12.2 main
Re-Install the Correct IOS.
"". ."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> I have a Cisco 2651 with two Fast Ethernet interfaces. I have accidentally
> installed a Cisco 2600 IOS image. now when I do a "show run" the
interfaces
> are not there anymore. I tried t
As 2600 series are modular, on mode rommon or boot, I think they have no way
of knowing what kind of interfaces have connected, so they use the first lan
interface for downloading the new ios, check that link
http://www.cisco.com/warp/public/130/recovery_c2600.html
It's also posible to download th
4 matches
Mail list logo