Guys,
does anyone have any information on CEF ?
How can I measure the improvements upon its implementation ?
cheers,
Bal Sandhu
e-mail : mailto:[EMAIL PROTECTED]
http://www.madge.com
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Assoc
Hi!
I would really recommend you get the Inside Cisco IOS architecture book,
it
gives a lot of information on the different switching modes of cisco...
In resume, CEF builds the "switching table" in configuration time (instead
on
the first packet of a flow, as fast-switching does). To hold the
Subject: Re: Cisco Express Forwarding
>
>
> Hi!
>
> I would really recommend you get the Inside Cisco IOS architecture book,
> it
> gives a lot of information on the different switching modes of cisco...
>
> In resume, CEF builds the "switching table" in configurat
Another question,
in CEF is the whole routing table held in a cache? If so what is the
diffrence between this and the routing table held in RAM? Is the cache
faster than the regular RAM in the router?
Thanks,
Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74794&t
> in CEF is the whole routing table held in a cache? If so what is the
> diffrence between this and the routing table held in RAM? Is the cache
> faster than the regular RAM in the router?
There are few excellent documents about this on our favourite website.
Watch for wrap.
[Cisco I
iello
Sent: Thursday, September 04, 2003 10:06 AM
To: [EMAIL PROTECTED]
Subject: ??? Cisco Express Forwarding ??? [7:74794]
Another question,
in CEF is the whole routing table held in a cache? If so what is the
diffrence between this and the routing table held in RAM? Is the cache
faster tha
Just for the sake of clarity: "cache" in this context doesn't refer to a
faster-than-usual memory. The route cache is in the exact same RAM as the
routing table. For more details, see the documents Marko mentioned.
Thanks,
Zsombor
Steven Aiello wrote:
>
> Another question,
>
> in CEF is the
Hi
I have a C2600 router with 32 MB of memory connected to my backbone. This
router should share the bandwidth among three Cisco routers connected
through the LAN (Fast-Ethernet ports). For example, a 3 Mbps bandwidth
should be shared between these routers so the traffic going through each of
the
Couple of items:
CEF is a very low overhead process and, in terms of
CPU and memory, you should be fine. I am not as
certain that your intentions to use the MAC address of
the router as a filter point will work. Typically you
use an IP extended ACL for CAR. Also review how
routers filter outbound
9 matches
Mail list logo