Hi I have a C2600 router with 32 MB of memory connected to my backbone. This router should share the bandwidth among three Cisco routers connected through the LAN (Fast-Ethernet ports). For example, a 3 Mbps bandwidth should be shared between these routers so the traffic going through each of these routers should be limited to 1 Mbps. I wanted to use CAR using the MAC address of the Fast-Ethernet ports to limit the bandwidth for each router, but I had to enable CEF on the Ethernet interface. I not sure what performance impacts would CEF cause on the C2600 router and I was wondering if the C2600 router could handle this. I am not sure if I am using the best solution, so it would be appreciated if I could have your advice. Thanks In advance Hamid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8876&t=8876 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]