Controller E1 Up/down [7:4810]

Dear group I have a channelized E1 Link,media is microwave.Its controller is flapping continuesly as the logging below.can I check the initiating point of failure. thanks in advance DA 05-16-2001 07:44:48Local7.Notice 172.18.1.2543219: %CONTROLLER-5-UPDOWN: Controller E1

Controller E1 Up/down [7:4806]

Dear all I am finding controller Up/down on channelized E1 link.This is a microwave link.How to check the error generating point. thanks in advance. DA 05-16-2001 11:26:42 Local7.Notice 172.18.1.254 3222: %CONTROLLER-5-UPDOWN: Controller E1 5/0, changed state to up 05-16-2001 11:26:41 Local7

Controller E1

Hi all, I Have controller E1 and had previously configured it with pri-group time-slots as the E1 link was from a switch ,now we are shifting to a radio modem from Harris corporation (microstar) so no switch will be involved the radio modem will give the E1 singnalling ,do i still configure the

Re: reason of "controller e1 up and down continuously"

I'm confused... I thought that if you had 2 different encapsulations on both ends than it wouldn't be going up at all, let alone bouncing. In a message dated 1/15/01 2:07:28 PM Eastern Standard Time, [EMAIL PROTECTED] writes: > Most likely > > When we see channels bouncing on our PRIs,

Re: reason of "controller e1 up and down continuously"

Most likely When we see channels bouncing on our PRIs, we usually suspect a telco loop or some switch module issues. Sometimes even running through a MUX or framing mismatch causes trouble. But if using HDLC solved the problem then that probably was the problem... :) You guys must both have

reason of "controller e1 up and down continuously"

when i setup a point to point link with my colleague, my contro e1 0 up and down continuously,at first we thought maybe the physical link's problem,we made local loop and far loop but no result. finally,we found my colleague encap the link with FR, but i encap hdlc.After he changed it to hdlc,all