What's this message mean in the LOG ? Note: A random Spanning Tree Bridge Identifier address of 0000.0f00.33a0 has been chosen for Bridge Group 40 since there is no mac address associated with the selected interface. Ensure that this address is unique. My reason for asking is, I'm troubleshooting an issue of slow speed to a share on an NT server. The route goes like this: remote users on a 2948G that is fiber attached to a 5509 then routed by a 7200 through a full T1 to another 7200 then to a 8540 to an NT server. The complaint is slow speed accessing a share on this server. Trace times are around <10 to 80 ms max from the users desktop to the server. Here's a twist, the route back goes through the frame-relay instead of the full T1. Would I need to set up a BANDWIDTH for loading balance on EIGRP, thus preferring the T1 over the frame link on the return trip? I've seen it become slow at the 2948G but maintaining faster speeds from a PC connected to the 5509 at the remote end. So I suspecting switch problems at that end, but I'm not sure. The message in the LOG above may not have anything to do at all with the slow speed problem, but I was just curious. I welcome any thoughts out there in the group. Thanks, -L ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]