Hi group, I had the following additional questions may be some one can answer or has experience with:
So if I have several switches and I want switch A to be the root of VLAN 5 would the command "set spantree 5" on switch A make it the root. What if switch Z is added to the network, is there a chance that this switch under the right circumstances will become the root. I guess what I am trying to ask is how can I make sure that switch A will always stay the root bridge for VLAN 5. Also related to above, once I run "set spantree root 5" will spanning tree protocol re-initialize and all the ports will go thru the different states of spanning tree. I am worried about all the servers and workstations that are connected to this switch. Will I need to reboot them. I hope I don't sound confusing, I am just trying to find the best way to do this at work. > ""JohnZ"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi group, I am try to figure out what is the difference between the > > following two commands: > > > > set spantree root 5 > > set spantree priority 0 5 > > > > Do both of them provide the same results: set vlan 5 as the root bridge. > > > > Thanks. > > JZ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44275&t=44275 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]