The only thing that I could see that was not done is as follows: Create a Loopback0 Interface on each router say "135.25.2.1 & 135.25.0.1
Have the Session Target > point to each others Loopback rather than the Serial Interface OSPF was used with an inverted mask in which this IP Scope includes all of the IPs used on the point to point and the two Loopbacks Router OSPF 64 network 135.25.0.0 0.0.255.255 area 0 (on both routers) With the above OSPF Network you will have ip classless or no ip classless Hope this helps! /northgatenet Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74291&t=74285 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
