Almost looks as if it's pulling from FLASH. To check your work- make sure
you have counted out the config-register pins (from right to left), with the
first pins counting as "0." For instance- to break into this router, the
clip must be @ pin 15 (which is really 16 pins hops from right to left).
Just an idea
Phil
> ----- Original Message -----
> From: "John Michalek" <[EMAIL PROTECTED]>
> Newsgroups: groupstudy.cisco
> To: <[EMAIL PROTECTED]>
> Sent: Monday, February 19, 2001 4:26 PM
> Subject: AGS run from Flash
>
>
> > I'm trying to have the AGS use flash rather than ROM. I've changed the
> > jumper settings to 0x2 but each time I try to load the image from flash
I
> > get a traceback and then the ROM image loads. I tried the 11.0.22,
> 11.0.18
> > and the 10.3.19a images with the same result.
> >
> > Here's the ouptput - any suggestions would be greatly appreciated!!!!
> >
> > %SYS-5-RELOAD: Reload requested
> > System Bootstrap, Version 5.3(6), SOFTWARE
> > Copyright (c) 1986-1994 by cisco Systems
> > CSC4 processor with 16384 Kbytes of main memory
> > ######
> >
> > F3: 5086688+110320+270520 at 0x1000
> > Booting gs3-k-m.103-19a.Z.bin from flash memory RRRRR
> >
> > %SYS-3-CPUHOG: Task ran for 173884 msec (3202/1455), Process = Boot
Load,
> PC
> > = 3783C
> > -Traceback= 4A2EA 4AB58 DA14 1080 10005EC 1009046
> > cisco2-csc4
> >
> > Here's the show version output:
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) GS Software (GS3-K-M), Version 10.3(6), RELEASE SOFTWARE (fc1)
> > Copyright (c) 1986-1995 by cisco Systems, Inc.
> > Compiled Thu 14-Sep-95 17:06 by vatran
> > Image text-base: 0x00001000, data-base: 0x004DADE0
> >
> > ROM: System Bootstrap, Version 5.3(6), SOFTWARE
> >
> > Router uptime is 0 minutes
> > System restarted by power-on
> > Running default software
> >
> > CSC4 (68040) processor with 16384K bytes of memory.
> > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> > Bridging software.
> > 1 MCI controller (0 Ethernet, 4 Serial).
> > 1 cBus controller.
> > 1 MEC controller (6 Ethernet).
> > Environmental Controller.
> > 6 Ethernet/IEEE 802.3 interfaces.
> > 4 Serial network interfaces.
> > 1 FDDI network interface.
> > 64K bytes of multibus memory.
> > 64K bytes of non-volatile configuration memory.
> > 4096K bytes of flash memory on MC+ card (via ENVM).
> >
> > Configuration register is 0x2
> >
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
