]f you are really sure about the client side configuration then the problem is your IOS. I had a similar problem like yours while I was at customer site and fixed it with upgrading the IOS to 12.09. The previous IOS was 11.x version and It has the commands to apply callback too but they didn't work.
Best regards, Cisco Breaker ""manhho nguyen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I want to configure asyn callback in router 2511. > the configuration is below, but when receive callback number from client, > the router cannot initiate callback function. > > > version 12.0 > service password-encryption > ! > hostname Router > ! > boot system flash > enable secret 5 $1$XpI9$5zIQu14lpRMz53STOwOH > y1 > ! > username back callback-dialstring "" callback-line 1 password ok > ip subnet-zero > ip domain-name hnpt.com > ip name-server 10.10.24.4 > chat-script resetModem "" "atz" OK "at&s0=1" OK > chat-script startModem "" "atz" OK "at&s0=1" OK > chat-script callback ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 45 > CONNECT \c > chat-script offhook "" "ATH1" OK \c > ! > interface Ethernet0 > ip address 10.10.24.1 255.255.254.0 > no ip directed-broadcast > no ip route-cache > ! > interface Async1 > ip unnumbered Ethernet0 > no ip directed-broadcast > ip mtu 512 > encapsulation ppp > no ip route-cache > ip tcp header-compression passive > no ip mroute-cache > async default routing > async mode dedicated > peer default ip address pool local-pool > ppp callback accept > ppp authentication pap callin > ! > ip local pool local-pool 10.10.24.238 10.10.24.254 > ip default-gateway 10.10.24.2 > no ip classless > ! > line con 0 > transport input none > line 1 > session-timeout 5 > autoselect during-login > script startup startModem > script modem-off-hook offhook > script callback callback > login local > modem answer-timeout 3 > modem autoconfigure type usr_sportster > modem InOut > transport input all > autohangup > callback forced-wait 10 > speed 115200 > flowcontrol hardware > ! > > I debug some output: > > General OS: > Modem control/process activation debugging is on > PPP: > PPP authentication debugging is on > PPP protocol negotiation debugging is on > Chat Scripts: > Chat scripts activity debugging is on > Callback: > Callback activity debugging is on > > and the result is: > > 1d22h: TTY1: DSR came up > 1d22h: TTY1: destroy timer type 1 > 1d22h: TTY1: destroy timer type 0 > 1d22h: TTY1: create timer type 2, 300 seconds > 1d22h: tty1: Modem: IDLE->READY > 1d22h: As1 LCP: I CONFREQ [Closed] id 0 len 23 > 1d22h: As1 LCP: ACCM 0x00000000 (0x020600000000) > 1d22h: As1 LCP: MagicNumber 0x00002477 (0x050600002477) > 1d22h: As1 LCP: PFC (0x0702) > 1d22h: As1 LCP: ACFC (0x0802) > 1d22h: As1 LCP: Callback 6 (0x0D0306) > 1d22h: As1 LCP: Lower layer not up, Fast Starting > 1d22h: As1 PPP: Treating connection as a dedicated line > 1d22h: As1 PPP: Phase is ESTABLISHING, Active Open > 1d22h: As1 LCP: O CONFREQ [Closed] id 44 len 24 > 1d22h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000) > 1d22h: As1 LCP: AuthProto PAP (0x0304C023) > 1d22h: As1 LCP: MagicNumber 0x1A7AD1B6 (0x05061A7AD1B6) > 1d22h: As1 LCP: PFC (0x0702) > 1d22h: As1 LCP: ACFC (0x0802) > 1d22h: As1 LCP: O CONFACK [REQsent] id 0 len 23 > 1d22h: As1 LCP: ACCM 0x00000000 (0x020600000000) > 1d22h: As1 LCP: MagicNumber 0x00002477 (0x050600002477) > 1d22h: As1 LCP: PFC (0x0702) > 1d22h: As1 LCP: ACFC (0x0802) > 1d22h: As1 LCP: Callback 6 (0x0D0306) > *Mar 2 22:35:00: %LINK-3-UPDOWN: Interface Async1, changed state to up > 1d22h: As1 LCP: I CONFACK [ACKsent] id 44 len 24 > 1d22h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000) > 1d22h: As1 LCP: AuthProto PAP (0x0304C023) > 1d22h: As1 LCP: MagicNumber 0x1A7AD1B6 (0x05061A7AD1B6) > 1d22h: As1 LCP: PFC (0x0702) > 1d22h: As1 LCP: ACFC (0x0802) > 1d22h: As1 LCP: State is Open > 1d22h: As1 PPP: Phase is AUTHENTICATING, by this end > 1d22h: As1 LCP: I IDENTIFY [Open] id 1 len 18 magic 0x00002477 MSRASV4.00 > 1d22h: As1 LCP: I IDENTIFY [Open] id 2 len 20 magic 0x00002477 MSRAS-1-KING > 1d22h: As1 PAP: I AUTH-REQ id 22 len 22 from "callback" > 1d22h: As1 PAP: Authenticating peer callback > 1d22h: As1 PAP: O AUTH-ACK id 22 len 5 > 1d22h: As1 MCB: User callback Callback Number - Client ANY > 1d22h: Async1 PPP: O MCB Request(1) id 208 len 9 > 1d22h: Async1 MCB: O 1 D0 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 208 Callback Type Client-Num delay 0 > 1d22h: As1 PPP: Phase is CBCP > *Mar 2 22:35:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, > change > d state to up > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 209 len 9 > 1d22h: Async1 MCB: O 1 D1 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 209 Callback Type Client-Num delay 0 > 1d22h: TTY16: autoconfigure probe started > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 210 len 9 > 1d22h: Async1 MCB: O 1 D2 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 210 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 211 len 9 > 1d22h: Async1 MCB: O 1 D3 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 211 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 212 len 9 > 1d22h: Async1 MCB: O 1 D4 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 212 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 213 len 9 > 1d22h: Async1 MCB: O 1 D5 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 213 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 214 len 9 > 1d22h: Async1 MCB: O 1 D6 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 214 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 215 len 9 > 1d22h: Async1 MCB: O 1 D7 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 215 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 216 len 9 > 1d22h: Async1 MCB: O 1 D8 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 216 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 217 len 9 > 1d22h: Async1 MCB: O 1 D9 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 217 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 218 len 9 > 1d22h: Async1 MCB: O 1 DA 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 218 Callback Type Client-Num delay 0 > 1d22h: As1 MCB: Timeout in state WAIT_RESPONSE > 1d22h: Async1 PPP: O MCB Request(1) id 219 len 9 > 1d22h: Async1 MCB: O 1 DB 0 9 2 5 0 1 0 > 1d22h: As1 MCB: O Request Id 219 Callback Type Client-Num delay 0 > 1d22h: Async1 PPP: I MCB Response(2) id 219 len 19 > 1d22h: Async1 MCB: I 2 DB 0 13 2 F C 1 30 39 31 33 32 31 34 31 > 30 38 0 > 1d22h: As1 MCB: Received response > 1d22h: As1 MCB: Response CBK-Client-Num 2 15 12, addr 1-0913214108 > 1d22h: Async1 PPP: O MCB Ack(3) id 220 len 19 > 1d22h: Async1 MCB: O 3 DC 0 13 2 F C 1 30 39 31 33 32 31 34 31 > 30 38 0 > 1d22h: As1 MCB: O Ack Id 220 Callback Type Client-Num delay 12 > 1d22h: As1 MCB: Negotiated MCB with peer > 1d22h: As1 LCP: I TERMREQ [Open] id 3 len 8 (0x00000000) > 1d22h: As1 LCP: O TERMACK [Open] id 3 len 4 > 1d22h: As1 MCB: Peer terminating the link > 1d22h: As1 PPP: Phase is TERMINATING > 1d22h: As1 MCB: Link terminated by peer, Callback Needed > 1d22h: As1 MCB: Initiate Callback for callback at 0913214108 using Async > 1d22h: As1 MCB: Async-callback failed > ===== > ERROR CODE HERE > 1d22h: TTY1: DSR was dropped > 1d22h: tty1: Modem: READY->HANGUP > *Mar 2 22:35:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, > change > d state to down > 1d22h: TTY1: dropping DTR, hanging up > 1d22h: TTY1: Async Int reset: Dropping DTR > 1d22h: tty1: Modem: HANGUP->IDLE > 1d22h: As1 LCP: TIMEout: State TERMsent > 1d22h: As1 LCP: State is Closed > 1d22h: As1 PPP: Phase is DOWN > 1d22h: As1 PPP: Phase is ESTABLISHING, Passive Open > 1d22h: As1 LCP: State is Listen > 1d22h: TTY1: cleanup pending. Delaying DTR > *Mar 2 22:35:28: %LINK-5-CHANGED: Interface Async1, changed state to reset > 1d22h: As1 LCP: State is Closed > 1d22h: As1 PPP: Phase is DOWN > 1d22h: TTY1: cleanup pending. Delaying DTR > 1d22h: TTY1: cleanup pending. Delaying DTR > 1d22h: TTY1: cleanup pending. Delaying DTR > 1d22h: TTY16: autoconfigure probe started > 1d22h: TTY1: destroy timer type 0 > 1d22h: TTY1: destroy timer type 1 > 1d22h: TTY1: destroy timer type 3 > 1d22h: TTY1: destroy timer type 4 > 1d22h: TTY1: destroy timer type 2 (OK) > 1d22h: Async1: allowing modem_process to continue hangup > 1d22h: TTY1: restoring DTR > *Mar 2 22:35:33: %LINK-3-UPDOWN: Interface Async1, changed state to down > 1d22h: As1 LCP: State is Closed > 1d22h: As1 PPP: Phase is DOWN > > Anyone help me, please > > Thank you > [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21652&t=21652 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
