Hi all I am trying to configure fastetherchannel using Cisco 2924 MXL switch and Extreme Networks Summit 48 Switch . I configured fastethernet 0/1 through 0/4 using commands port group 1 switchport mode trunk
Also on Summit 48 switch I am using Enable enable sharing grouping command. Where port no defines master port i.e 1 in my case , portlist defines the no of ports taking part into etherchannel process 2-4 in this case. The momoment I confure the last port with cisco 2924 switch wih above mentioned commands it ( Cisco switch) switch goes to hang mode . The only way to come out of it's mode is I have to reset cisco switch. Can somebody help me out in doing so. Or is there anything missing in the configuration? Pls help me out. Thnaks in advance. Regards Parag ________________________________________________________________________ Want to sell your car? advertise on Yahoo Autos Classifieds. It's Free!! visit http://in.autos.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47984&t=47984 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]