I have this scenario: Network 1 with IP address 172.16.1.0/24 is on the "inside" interface of a Pix 515 running Code version 6.2(2) and PDM 2.0(2). The IP address of the Pix "inside" interface is 172.16.1.1. Workstations on network 172.16.1.0/24 can access the Internet via Port Address Translation (PAT) just fine. The IP address of the "outside" interface is 207.172.4.5
Network 2 with IP address 172.16.1.0/24 is on the "inside" interface of a Pix 515 running Code version 6.2(2) and PDM 2.0(2). The IP address of the Pix "inside" interface is 172.16.1.1. Workstations on network 172.16.1.0/24 can access the Internet via Port Address Translation (PAT) just fine. The IP address of the "outside" interface is 12.45.2.9 I would like to setup a Site-to-Site VPN between these two network. I know that dual-NAT will have to be done on both ends. I've been looking at Cisco website for documentation on how to do this. But so far, I've not been able to find it. By the way, RE-IPing one of the network IS NOT AN OPTION. I know how to set up Site-to-Site VPN with NON-overlapping address with Pix Firewalls on both end but not when they have identical address space on both end. I know how to do with with CheckPoint Next Generation (NG). With CP, it is very simple. I am sure this has done before. Can someone give me an example on how to get this done? Just send me the configuration and I know how to figure out from there. Regards, _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50255&t=50255 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]