RE: IPSec over Tunnel - not working !! [7:62124]

2003-01-31 Thread [EMAIL PROTECTED]
s-list 199 permit ip 2.2.2.0 0.0.0.255 any log!What am I doing wrong?Please help.Thank you.Sincerely,CN "Cisco Nuts" @groupstudy.com em 30/01/2003 09:00:13 Favor responder a "Cisco Nuts" Enviado Por: [EMAIL PROTECTED] Para: [EMAIL PROTECTED] cc: Assunto:RE: IPS

RE: IPSec over Tunnel - not working !! [7:62124]

2003-01-30 Thread Cisco Nuts
intf. it all starts working again!! Any ideas? >From: "Claudio Spescha" >Reply-To: "Claudio Spescha" >To: [EMAIL PROTECTED] >Subject: RE: IPSec over Tunnel - not working !! [7:62124] >Date: Wed, 29 Jan 2003 20:54:40 GMT > >Hello > >You should not en

Re: IPSec over Tunnel - not working !! [7:62124]

2003-01-29 Thread jose
Hi, First, you should apply the crypto to the physical an the logical interfaces. Second, define only gre traffic for the access-list Third, try to change the IP MTU size because the fragmentation (1440 or lower ) or configure the interface command "ip ospf mtu-ignore " Last of all, multicast

RE: IPSec over Tunnel - not working !! [7:62124]

2003-01-29 Thread Claudio Spescha
Hello You should not encrypt the tunnel network itself. First line of access-list 199 should be: access-list 199 deny ip 120.20.59.0 0.0.0.255 120.20.59.0 0.0.0.255 The router can not build an OSPF adjacency on encrypted traffic. see you Claudio Message Posted at: http://www.groupstudy.com/f

IPSec over Tunnel - not working !! [7:62124]

2003-01-29 Thread Cisco Nuts
Hello,I have 2 routers, R2R6 connected via serial netw. 120.20.26.0/24Ospf Area 0 is on R2, netw. 120.20.234.0/27Isis on lo0 on R2 (2.2.2.2/24) and on the serials between the 2 routersOspf Area 3 on R6, netws. 120.20.60.0/24 and lo0, 6.6.6.6/24 Created a tunnel on R2 and R6 to connect area 3 to are