Try and clear the config. Use "o/r0x42 at the > prompt and reload to bypass the config stored in NVRAM. Use the break sequence to get you to the > prompt if necessary. Sounds like an IOS bug with a router booting and a token-ring interface activated that is not plugged into a MAU.
>o/r0x42 >i (use to reload) After you clear the config don't forget to change the config register back to 0x2102. router(config)#config-register 0x2102 Marc Russell www.ccbootcamp.com ""michael kisiel"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Thanks ahead of time for your help. > > Just powered up a 2nd hand 2504 router and get the output below (see > below). I am connected via console only. Router "hangs" at Interface > TokenRing0, changed state to initializing (goes no further). I have tried > the break sequence at boot and get the the > prompt but, router will not > accept commands (i.e., locked up). > > output: > System Bootstrap, Version 4.14(6)[fc3], SOFTWARE > Copyright (c) 1986-1994 by cisco Systems > 2500 processor with 16384 Kbytes of main memory > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting cisco2-2500 .. > %TR-3-OPENFAIL: Unit 0, open failed: Lobe Test, failed. > Abort at 0x1013EC4 (PC) > > > System Bootstrap, Version 4.14(6)[fc3], SOFTWARE > Copyright (c) 1986-1994 by cisco Systems > 2500 processor with 16384 Kbytes of main memory > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting cisco2-2500 .. > %TR-3-OPENFAIL: Unit 0, open failed: Lobe Test, failed.......... [timed out] > Network load failed > > System Bootstrap, Version 4.14(6)[fc3], SOFTWARE > Copyright (c) 1986-1994 by cisco Systems > 2500 processor with 16384 Kbytes of main memory > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting cisco2-2500 > Abort at 0x1013E94 (PC) > > > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting c2500-js56i-1.120-9.mz from Flash address space [buffer overflow - > 5115 > 388/646438 bytes] > Flash load failed > > System Bootstrap, Version 4.14(6)[fc3], SOFTWARE > Copyright (c) 1986-1994 by cisco Systems > 2500 processor with 1024 Kbytes of main memory > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting c2500-js56i-1.120-9.mz from Flash address space [buffer overflow - > 5115 > 388/646438 bytes] > Flash load failed > > System Bootstrap, Version 4.14(6)[fc3], SOFTWARE > Copyright (c) 1986-1994 by cisco Systems > 2500 processor with 1024 Kbytes of main memory > > Abort at 0x1098324 (PC) > > > 2500 processor with 16384 Kbytes of main memory > > Unknown tcp configuration command "synwait-time" > Illegal IP keyword - mroute-cache > Unknown or ambiguous frame_relay subcommand-inverse-arp > Illegal IP keyword - classless > Booting c2500-js56i-1.120-9.mz from Flash address space > rrrrrrrrrrrrrrrrrrrrrrrr > rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr > [OK - 5115388/16375078 bytes] > F3: 8564+5106792+165012 at 0x1000 > Self decompressing the image : > ################################################# > ############################################################################ #### > ############################################################################ #### > ############# [OK] > > Restricted Rights Legend > > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and Computer > Software clause at DFARS sec. 252.227-7013. > > cisco Systems, Inc. > 170 West Tasman Drive > San Jose, California 95134-1706 > > > > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-JS56I-L), Version 12.0(9), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Tue 25-Jan-00 01:54 by bettyl > Image text-base: 0x0000144C, data-base: 0x009D986C > > > Compliance with U.S. Export Laws and Regulations - Encryption > > This product performs encryption and is regulated for export > by the U.S. Government. > > This product is not authorized for use by persons located > outside the United States and Canada that do not have prior > approval from Cisco Systems, Inc. or the U.S. Government. > > This product may not be exported outside the U.S. and Canada > either by physical or electronic means without PRIOR approval > of Cisco Systems, Inc. or the U.S. Government. > > Persons outside the U.S. and Canada may not re-export, resell, > or transfer this product by either physical or electronic means > without prior approval of Cisco Systems, Inc. or the U.S. > Government. > > cisco 2500 (68030) processor (revision B) with 16384K/2048K bytes of memory. > Processor board ID 01166016, with hardware revision 00000000 > Bridging software. > X.25 software, Version 3.0.0. > SuperLAT software (copyright 1990 by Meridian Technology Corp). > TN3270 Emulation software. > Basic Rate ISDN software, Version 1.1. > 1 Token Ring/IEEE 802.5 interface(s) > 2 Serial network interface(s) > 1 ISDN Basic Rate interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash (Read/Write) > > ip ospf interface-retry 0 > ^ > % Invalid input detected at '^' marker. > > ip ospf interface-retry 0 > ^ > % Invalid input detected at '^' marker. > > ip ospf interface-retry 0 > ^ > % Invalid input detected at '^' marker. > > > > Press RETURN to get started! > > > *Mar 1 00:01:22.115: %SYS-5-CONFIG_I: Configured from memory by console > *Mar 1 00:01:23.379: %LINK-5-CHANGED: Interface BRI0, changed state to > administ > ratively down > *Mar 1 00:01:23.415: %LINK-5-CHANGED: Interface TokenRing0, changed state > to in > itializing > *Mar 1 00:01:23.447: %LINK-5-CHANGED: Interface Serial0, changed state to > admin > istratively down > *Mar 1 00:01:23.479: %LINK-3-UPDOWN: Interface Serial1, changed state to > down > *Mar 1 00:01:23.515: %FR-5-DLCICHANGE: Interface Serial1 - DLCI 305 state > chang > ed to DELETED > *Mar 1 00:01:23.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface > BRI0:1, ch > anged state to down > *Mar 1 00:01:23.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface > BRI0:2, ch > anged state to down > *Mar 1 00:01:24.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, > chan > ged state to down > *Mar 1 00:01:24.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface > TokenRing0 > , changed state to down > *Mar 1 00:01:24.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface > Serial0, c > hanged state to down > *Mar 1 00:01:24.479: %LINEPROTO-5-UPDOWN: Line protocol on Interface > Serial1, c > hanged state to down > *Mar 1 00:01:25.519: %TR-3-OPENFAIL: Unit 0, open failed: Lobe Test, failed > *Mar 1 00:01:25.523: %SYS-5-RESTART: System restarted -- > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-JS56I-L), Version 12.0(9), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Tue 25-Jan-00 01:54 by bettyl > *Mar 1 00:01:30.167: %LINK-3-UPDOWN: Interface TokenRing0, changed state to > dow > n > *Mar 1 00:01:36.543: %LINK-5-CHANGED: Interface TokenRing0, changed state > to in > itializing Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30163&t=30163 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
