Hello, I am multihoming BGP with two seperate ISP's via single router that is connected to a PIX. When I shutdown the one of my serial ports to one of the ISP's you can see the BGP table removing paths. All trace's show that the router starts routing to the ISP that is still active, but all the workstations on the inside of the pix interface can no longer route. I've read where the PIX Firewall does not support the use of BGP, and that I could use RIP between them. Does anyone have an example of this configuration? My searches on this subject within Cisco's knowledgebase have not been very successfull. Or if you can think of another solution for my setup, please let me know. Thank you, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19328&t=19328 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]